Download Print this page

Bosch VJT-X20S Installation And Operating Manual

Operation manual.
Hide thumbs

Advertisement

VideoJet X20
Network Video Server
en
Installation and Operating Manual

Advertisement

   Related Manuals for Bosch VJT-X20S

   Summary of Contents for Bosch VJT-X20S

  • Page 1

    VideoJet X20 Network Video Server Installation and Operating Manual...

  • Page 2

    VideoJet X20...

  • Page 3: Table Of Contents

    5.13 Advanced Mode: Display Stamping 5.14 Advanced Mode: Appearance 5.15 Advanced Mode: LIVEPAGE Functions 5.16 Advanced Mode: Logging 5.17 Advanced Mode: Video Input 5.18 Advanced Mode: Picture Settings Bosch Security Systems Installation and Operating Manual DOC | V4.0 | 2009.06...

  • Page 4

    Installing the Player Hardware Connections Between Video Servers Operation Using Software Decoders Maintenance and Upgrades Testing the Network Connection Unit Reset Repairs Transfer and Disposal Appendix Troubleshooting General Malfunctions DOC | V4.0 | 2009.06 Installation and Operating Manual Bosch Security Systems...

  • Page 5

    Table of Contents | en Malfunctions with iSCSI Connections LEDs Processor Load Network Connection Serial Interface Terminal Block Communication with Terminal Program 8.10 Copyrights Specifications Unit Protocols/Standards Glossary Index Bosch Security Systems Installation and Operating Manual DOC | V4.0 | 2009.06...

  • Page 6

    | Table of Contents VideoJet X20 DOC | V4.0 | 2009.06 Installation and Operating Manual Bosch Security Systems...

  • Page 7: Preface

    Various functions can be triggered automatically by incorporating external alarm sensors. Other applications are not permitted. In the event of questions concerning the use of the unit which are not answered in this manual, please contact your sales partner or: Bosch Security Systems Robert-Koch-Straße 100 85521 Ottobrunn Germany www.boschsecurity.com...

  • Page 8: Eu Directives

    Please make a note of this information before installation, if necessary, so as to have it to hand in case of questions or when ordering spare parts. DOC | V4.0 | 2009.06 Installation and Operating Manual Bosch Security Systems...

  • Page 9: Safety Information

    – If safe operation of the unit cannot be ensured, remove it from service and secure it to prevent unauthorized operation. In such cases, have the unit checked by Bosch Security Systems. Safe operation is no longer possible in the following cases: –...

  • Page 10

    | Safety Information VideoJet X20 DOC | V4.0 | 2009.06 Installation and Operating Manual Bosch Security Systems...

  • Page 11: Product Description

    Adobe Acrobat Reader NOTICE! Check that the delivery is complete and in perfect condition. Arrange for the unit to be checked by Bosch Security Systems if you find any damage. Bosch Security Systems Installation and Operating Manual DOC | V4.0 | 2009.06...

  • Page 12: System Requirements

    Additional Operational Requirements – Microsoft Internet Explorer (version 6.0 or higher) – Receiver software, for example VIDOS (version 3.11 or higher) or Bosch Video Management System (version 2.02 or higher) – MPEG-4 compatible hardware decoder from Bosch Security Systems (for example VIP XD) as a receiver and connected video monitor –...

  • Page 13: Overview Of Functions

    HTTPS. You can protect the control channels via the SSL encryption protocol. With an additional license, the user data itself can be encrypted. Bosch Security Systems Installation and Operating Manual DOC | V4.0 | 2009.06...

  • Page 14

    Integrated Network Switch The integrated switch functionality of the VideoJet X20 permits the ETH 1, ETH 2 and SFP interfaces to be used alternatively, redundantly or for cascading other units. DOC | V4.0 | 2009.06 Installation and Operating Manual Bosch Security Systems...

  • Page 15

    – Authentication according to international standard 802.1x – Transmission and receipt of audio signals – Bidirectional audio (mono) for line connections – Audio encoding to international standard G.711 Bosch Security Systems Installation and Operating Manual DOC | V4.0 | 2009.06...

  • Page 16: Connections On The Front Panel

    HDD LED flashes orange when hard drive activity is detected (only on units with a hard drive installed) DOC | V4.0 | 2009.06 Installation and Operating Manual Bosch Security Systems...

  • Page 17: Connections On The Rear Panel

    SFP slot for mini-GBIC module NOTICE! For more information about the LEDs, see Section 8.4 LEDs, page 113. For terminal block assignment, see Section 8.8 Terminal Block, page 115. Bosch Security Systems Installation and Operating Manual DOC | V4.0 | 2009.06...

  • Page 18

    | Product Description VideoJet X20 DOC | V4.0 | 2009.06 Installation and Operating Manual Bosch Security Systems...

  • Page 19: Installation

    For mounting on concrete, use screws with the following minimum specification: M4 × 40 mm (1.57 in) and 6 mm (0.23 in) plastic dowels, for example fischer S4, type 50106. Bosch Security Systems Installation and Operating Manual DOC | V4.0 | 2009.06...

  • Page 20: Connections

    Connect the VideoJet X20 to the network via the ETH 1 socket. Connect the VideoJet X20 to a redundant switch or hub on the same network via the ETH 2 socket. DOC | V4.0 | 2009.06 Installation and Operating Manual Bosch Security Systems...

  • Page 21

    For ETH 1 or ETH 2 connections, use a UTP category 5 network cable with RJ45 plugs. NOTICE! You can obtain a list of compatible iSCSI systems from your supplier or directly from Bosch Security Systems. This list is constantly being updated and extended. CF Slot You can insert a type I or II CompactFlash card into the Compact Flash slot to enable recordings to be saved locally.

  • Page 22

    Please comply with the following specifications and the connection diagram: Voltage between RM1 and RM2 3.3 V DC max. Current between RM1 and RM2 25 mA max. Source resistance 140 Ohm typ. DOC | V4.0 | 2009.06 Installation and Operating Manual Bosch Security Systems...

  • Page 23

    Now check that the connections are secure. NOTICE! If you do not connect a battery to the unit, you should specify a time server to ensure correct system time. Bosch Security Systems Installation and Operating Manual DOC | V4.0 | 2009.06...

  • Page 24: Power On/power Off

    Insert the CD into the computer's CD-ROM drive. If the CD does not start automatically, open the Configuration Manager directory using Windows Explorer and double-click Setup.exe. Follow the on-screen instructions. DOC | V4.0 | 2009.06 Installation and Operating Manual Bosch Security Systems...

  • Page 25

    Additional Parameters You can check and set additional parameters with the assistance of the Configuration Manager. You can find detailed information on this in the documentation for this program. Bosch Security Systems Installation and Operating Manual DOC | V4.0 | 2009.06...

  • Page 26

    | Installation VideoJet X20 DOC | V4.0 | 2009.06 Installation and Operating Manual Bosch Security Systems...

  • Page 27: Configuration Using A Web Browser

    Insert the product CD into the computer's CD-ROM drive. If the CD does not start automatically, open the root directory of the CD in Windows Explorer and double-click MPEGAx.exe. Follow the on-screen instructions. Bosch Security Systems Installation and Operating Manual DOC | V4.0 | 2009.06...

  • Page 28

    If you do not connect, the unit may have reached its maximum number of connections. Depending on the unit and network configuration, each VideoJet X20 can have up to 25 Web browser connections or up to 50 connections via VIDOS or Bosch Video Management System. DOC | V4.0 | 2009.06...

  • Page 29: Configuration Menu

    The settings in the advanced mode should only be processed or modified by expert users or system support personnel. All settings are backed up in the VideoJet X20 memory so they are not lost even if the power fails. Bosch Security Systems Installation and Operating Manual DOC | V4.0 | 2009.06...

  • Page 30

    CAUTION! Save each change with the associated Set button. Clicking the Set button saves the settings only in the current field. Changes in any other fields are ignored. DOC | V4.0 | 2009.06 Installation and Operating Manual Bosch Security Systems...

  • Page 31: Basic Mode: Unit Access

    It will be displayed in the video screen if configured to do so (see Section Camera name stamping, page 41). The camera name makes the task of administering cameras in larger video monitoring systems easier, for example using the VIDOS or Bosch Video Management System programs.

  • Page 32: Basic Mode: Date/time

    If necessary, you can synchronize the unit with your computer's system settings. Click the Sync to PC button to copy your computer's system time to the VideoJet X20. DOC | V4.0 | 2009.06 Installation and Operating Manual Bosch Security Systems...

  • Page 33: Basic Mode: Network

    If a DHCP server is employed in the network for the dynamic assignment of IP addresses, you can activate acceptance of IP addresses automatically assigned to the VideoJet X20. Certain applications (VIDOS, Bosch Video Management System, Archive Player, Configuration Manager) use the IP address for the unique assignment of the unit. If you use these...

  • Page 34: Basic Mode: Encoder Profile

    For ISDN connections via one B-channel, resolution 352 × 288/240 pixels – Modem For analog modem connections with 20 kbps, resolution 352 × 288/240 pixels – For GSM connections at 9,600 baud, resolution 176 × 144/120 pixels DOC | V4.0 | 2009.06 Installation and Operating Manual Bosch Security Systems...

  • Page 35: Basic Mode: Audio

    Line Out You can set the line output gain. Make sure that the display does not go beyond the green zone during modulation. Bosch Security Systems Installation and Operating Manual DOC | V4.0 | 2009.06...

  • Page 36: Basic Mode: Recording

    You can select all required text on this page with the mouse and copy it to the clipboard with the [Ctrl]+[C] key combination, for example if you want to send it via e-mail. DOC | V4.0 | 2009.06 Installation and Operating Manual Bosch Security Systems...

  • Page 37: Advanced Mode: Identification

    It will be displayed in the video screen if configured to do so (see Section Camera name stamping, page 41). The camera name makes the task of administering cameras in larger video monitoring systems easier, for example using the VIDOS or Bosch Video Management System programs.

  • Page 38

    This text is added to the initiator name, separated from it by a full stop. You can see the initiator name in the system overview (see Section 5.9 Basic Mode: System Overview, page 36). DOC | V4.0 | 2009.06 Installation and Operating Manual Bosch Security Systems...

  • Page 39: Advanced Mode: Password

    In each case, enter the new password a second time to eliminate typing mistakes. NOTICE! A new password is only saved when you click the Set button. You should therefore click the Set button immediately after entering and confirming a password. Bosch Security Systems Installation and Operating Manual DOC | V4.0 | 2009.06...

  • Page 40: Advanced Mode: Date/time

    Clicking the Delete button will remove the entry from the table. Select other values from the list fields below the table to change the entry. Changes are made immediately. DOC | V4.0 | 2009.06 Installation and Operating Manual Bosch Security Systems...

  • Page 41: Advanced Mode: Display Stamping

    If you select the Custom option, additional fields are displayed where you can specify the exact position (Position (XY)). In the Position (XY) fields, enter the values for the desired position. Bosch Security Systems Installation and Operating Manual DOC | V4.0 | 2009.06...

  • Page 42: Advanced Mode: Appearance

    If necessary, you can replace the manufacturer's logo (top right) and the product name (top left) in the top part of the window with individual graphics. DOC | V4.0 | 2009.06 Installation and Operating Manual Bosch Security Systems...

  • Page 43

    You can specify the interval at which the individual images should be generated for the M- JPEG image on the LIVEPAGE. JPEG quality You can specify the image quality for displaying M-JPEG on the LIVEPAGE. Bosch Security Systems Installation and Operating Manual DOC | V4.0 | 2009.06...

  • Page 44: Advanced Mode: Livepage Functions

    Bilinx control Next to the field for view control at the top left of the LIVEPAGE, an additional field is displayed for the special Bosch Security Systems Bilinx control. Lease time (s) The lease time in seconds determines the time beyond which a different user is authorized to control the cameras after no further control signals are received from the current user.

  • Page 45: Advanced Mode: Logging

    You can then view, edit and print this file with any text editor or the standard Office software. File for event log Enter the path for saving the event log here. If necessary, click Browse to find a suitable directory. Bosch Security Systems Installation and Operating Manual DOC | V4.0 | 2009.06...

  • Page 46: Advanced Mode: Video Input

    PLL as a result of jitter effects caused by the mechanical components of a VCR. NOTICE! In some cases, selecting the VCR option can lead to an improvement in the video image even with a camera connected. DOC | V4.0 | 2009.06 Installation and Operating Manual Bosch Security Systems...

  • Page 47: Advanced Mode: Picture Settings

    Also observe the processor load indicator that appears at the top of the window near the manufacturer's logo (see Section 8.6 Network Connection, page 114). Bosch Security Systems Installation and Operating Manual DOC | V4.0 | 2009.06...

  • Page 48: Advanced Mode: Encoder Profile

    You must set the parameters for each camera input and for each stream individually. The names Video 1 and Video 2 correspond to the labeling of the video inputs on the unit. DOC | V4.0 | 2009.06 Installation and Operating Manual Bosch Security Systems...

  • Page 49

    Profile name You can enter a new name for the profile here. The name is then displayed in the list of available profiles in the Active profile field. Bosch Security Systems Installation and Operating Manual DOC | V4.0 | 2009.06...

  • Page 50

    I-frames are continuously generated. An entry of 2 indicates that only every second image is an I-frame, and 3 only every third image etc.; the frames in between are coded as P-frames. DOC | V4.0 | 2009.06 Installation and Operating Manual Bosch Security Systems...

  • Page 51: Advanced Mode: Audio

    The numbering of the audio inputs follows the labeling on the unit and the assignment to the respective video inputs. The assignment cannot be changed for Web browser connections. Bosch Security Systems Installation and Operating Manual DOC | V4.0 | 2009.06...

  • Page 52

    Selection Click one of the option boxes and then click Set to display the level of the respective audio input for orientation and to set the gain. DOC | V4.0 | 2009.06 Installation and Operating Manual Bosch Security Systems...

  • Page 53: Advanced Mode: Storage Management

    It is also possible to let the VRM Video Recording Manager control all recording when accessing an iSCSI system. This is an external program for configuring recording tasks for video servers. For further information please contact your local customer service at Bosch Security Systems.

  • Page 54

    Check the boxes for the Overwrite older recordings option to specify which older recordings can be overwritten once the available memory capacity has been used. Recording 1 corresponds to Stream 1, Recording 2 corresponds to Stream 2. DOC | V4.0 | 2009.06 Installation and Operating Manual Bosch Security Systems...

  • Page 55: Advanced Mode: Remote Video Device

    A small arrow is then displayed next to the IP Address field. Click the arrow to display the list of devices detected. Click the required device in the list to transfer its IP address. Bosch Security Systems Installation and Operating Manual DOC | V4.0 | 2009.06...

  • Page 56: Advanced Mode: Recording Profiles

    Click the Copy Settings button if you want to copy the currently visible settings to other profiles. A new window will open and you can select the profiles in which you want to copy the settings. DOC | V4.0 | 2009.06 Installation and Operating Manual Bosch Security Systems...

  • Page 57

    NOTICE! For more information, please see the Alarm Task Script Language document and the RCP+ documentation. These documents can be found on the product CD supplied. Bosch Security Systems Installation and Operating Manual DOC | V4.0 | 2009.06...

  • Page 58: Advanced Mode: Retention Time

    Retention time Camera 1 / Retention time Camera 2 Enter the required retention time in hours or days for each recording. Recording 1 corresponds to Stream 1, Recording 2 corresponds to Stream 2. DOC | V4.0 | 2009.06 Installation and Operating Manual Bosch Security Systems...

  • Page 59: Advanced Mode: Recording Scheduler

    Click the Select All button to link all time intervals to the selected profile. Click the Clear All button to deselect all of the intervals. When you are finished, click the Set button to save the settings in the unit. Bosch Security Systems Installation and Operating Manual DOC | V4.0 | 2009.06...

  • Page 60

    Recording status The graphic indicates the recording activity of the VideoJet X20. You will see an animated graphic while recording is taking place. DOC | V4.0 | 2009.06 Installation and Operating Manual Bosch Security Systems...

  • Page 61: Advanced Mode: Recording Status

    Configuration Using a Web Browser | en 5.26 Advanced Mode: Recording Status Certain details on the recording status are displayed here for information purposes. You cannot change any of these settings. Bosch Security Systems Installation and Operating Manual DOC | V4.0 | 2009.06...

  • Page 62: Advanced Mode: Alarm Connections

    If connections to more than ten remote stations are to be possible, for example when initiating connections via higher-ranking systems such as DOC | V4.0 | 2009.06 Installation and Operating Manual Bosch Security Systems...

  • Page 63

    VideoJet X20 Configuration Using a Web Browser | en VIDOS or Bosch Video Management System, you can store a general password here. The VideoJet X20 can use this general password to connect to all remote stations protected with the same password. In this case, proceed as follows: Select 10 from the Number of destination IP address list field.

  • Page 64

    Depending on the system configuration, the receiver can then select the other cameras as well. NOTICE! The numbering follows the labeling of the video inputs on the actual unit. DOC | V4.0 | 2009.06 Installation and Operating Manual Bosch Security Systems...

  • Page 65: Advanced Mode: Vca

    Click one of the tabs to open the configuration of the corresponding video input. Select a VCA configuration and make the required settings. If necessary, click the Default button to return all settings to their default values. Bosch Security Systems Installation and Operating Manual DOC | V4.0 | 2009.06...

  • Page 66: Advanced Mode: Vca Profiles

    (see Section 8.6 Network Connection, page 114). Select a VCA profile and enter the required settings. If necessary, click the Default button to return all settings to their default values. DOC | V4.0 | 2009.06 Installation and Operating Manual Bosch Security Systems...

  • Page 67

    NOTICE! Additional analysis algorithms with comprehensive functions such as IVMD and IVA are available from Bosch Security Systems. If you select one of these algorithms, you can set the corresponding parameters here directly. You can find information on this in the relevant documents on the product CD supplied.

  • Page 68

    This allows you to avoid false alarms triggered by short-term changes, for example cleaning activities in the direct field of vision of the camera. DOC | V4.0 | 2009.06 Installation and Operating Manual Bosch Security Systems...

  • Page 69

    Click Select Area to configure the sensor fields. A new window will open. If necessary, click Clear All first to clear the current selection (fields marked yellow). Bosch Security Systems Installation and Operating Manual DOC | V4.0 | 2009.06...

  • Page 70: Advanced Mode: Vca Scheduled

    In addition to the normal weekdays, you can define holidays that are not in the standard weekly schedule on which recordings are to apply. This allows you to apply a schedule for Sundays to other days with dates that fall on varying weekdays. DOC | V4.0 | 2009.06 Installation and Operating Manual Bosch Security Systems...

  • Page 71

    Click the date you wish to delete. Click OK. The item will be deleted from the table and the window will close. The process must be repeated for deleting additional days. Bosch Security Systems Installation and Operating Manual DOC | V4.0 | 2009.06...

  • Page 72: Advanced Mode: Vca Event Triggered

    For more information, please see the Alarm Task Script Language document and the RCP+ documentation. You can find these documents on the product CD supplied (see Section 3.1 Scope of Delivery, page 11). DOC | V4.0 | 2009.06 Installation and Operating Manual Bosch Security Systems...

  • Page 73: Advanced Mode: Audio Alarm

    First set up normal audio transmission before you configure the audio alarm here (see Section 5.20 Advanced Mode: Audio, page 51). Audio alarm Select On if you want the unit to generate audio alarms from the input in question. Bosch Security Systems Installation and Operating Manual DOC | V4.0 | 2009.06...

  • Page 74: Advanced Mode: Alarm E-mail

    VideoJet X20 Name The name makes it easier to identify the alarm in extensive video monitoring systems, for example with the VIDOS and Bosch Video Management System programs. Enter a unique and clear name here. CAUTION! Do not use any special characters, for example &, in the name.

  • Page 75

    Test e-mail You can test the e-mail function by clicking the Send Now button. An alarm e-mail is immediately created and sent. Bosch Security Systems Installation and Operating Manual DOC | V4.0 | 2009.06...

  • Page 76: Advanced Mode: Alarm Task Editor

    Script successfully parsed is displayed over the text field. If it was not successful, an error message will be displayed with further information. DOC | V4.0 | 2009.06 Installation and Operating Manual Bosch Security Systems...

  • Page 77: Advanced Mode: Alarm Inputs

    Idle state Select Open if you want the relay to operate as an NO contact, or select Closed if the relay is to operate as an NC contact. Bosch Security Systems Installation and Operating Manual DOC | V4.0 | 2009.06...

  • Page 78

    The Livepage can also be configured to display the name under the relay icon. Trigger relay Click the button to trigger the relay manually (for testing or to operate a door opener, for example). DOC | V4.0 | 2009.06 Installation and Operating Manual Bosch Security Systems...

  • Page 79: Advanced Mode: Com1

    The number of data bits per character cannot be changed. Stop bits Select the number of stop bits per character. Parity check Select the type of parity check. Bosch Security Systems Installation and Operating Manual DOC | V4.0 | 2009.06...

  • Page 80: Advanced Mode: Network

    Select the desired protocol for the serial interface. 5.38 Advanced Mode: Network The settings on this page are used to integrate the VideoJet X20 into an existing network. DOC | V4.0 | 2009.06 Installation and Operating Manual Bosch Security Systems...

  • Page 81

    If a DHCP server is employed in the network for the dynamic assignment of IP addresses, you can activate acceptance of IP addresses automatically assigned to the VideoJet X20. Certain applications (VIDOS, Bosch Video Management System, Archive Player, Configuration Manager) use the IP address for the unique assignment of the unit. If you use these...

  • Page 82

    Information about the service, registration process and available host names can be found at DynDNS.org. Host name Enter the host name registered on DynDNS.org for the VideoJet X20 here. DOC | V4.0 | 2009.06 Installation and Operating Manual Bosch Security Systems...

  • Page 83: Advanced Mode: Advanced

    Some changes only take effect after the unit is rebooted. In this case, the Set button changes to Set and Reboot. Make the desired changes. Click the Set and Reboot button. The VideoJet X20 is rebooted and the changed settings are activated. Bosch Security Systems Installation and Operating Manual DOC | V4.0 | 2009.06...

  • Page 84

    If necessary, select a different port for the exchange of the RTSP data from the list. The standard RTSP port is 554. Select Off to deactivate the RTSP function. DOC | V4.0 | 2009.06 Installation and Operating Manual Bosch Security Systems...

  • Page 85: Advanced Mode: Multicasting

    With the setting 0.0.0.0 the encoder for the relevant stream operates in multi-unicast mode (copying of data streams in the unit). The VideoJet X20 supports multi-unicast connections for up to five simultaneously connected receivers. Bosch Security Systems Installation and Operating Manual DOC | V4.0 | 2009.06...

  • Page 86: Advanced Mode: Jpeg Posting

    352 × 288/240 pixels (CIF) – Large 704 × 576/480 pixels (4CIF) File name You can select how file names will be created for the individual images that are transmitted. DOC | V4.0 | 2009.06 Installation and Operating Manual Bosch Security Systems...

  • Page 87: Advanced Mode: Encryption

    A special license, with which you will receive a corresponding activation key, is required to encrypt user data. You can enter the activation key to release the function on the Licenses page (see Section 5.44 Advanced Mode: Licenses, page 90). Bosch Security Systems Installation and Operating Manual DOC | V4.0 | 2009.06...

  • Page 88: Advanced Mode: Maintenance

    In the address bar of your browser, enter /main.htm after the IP address of the VideoJet X20 (for example 192.168.0.10/main.htm). Repeat the upload. DOC | V4.0 | 2009.06 Installation and Operating Manual Bosch Security Systems...

  • Page 89

    You can download an internal maintenance log from the unit to send it to Customer Service for support purposes. Click Download and select a storage location for the file. Bosch Security Systems Installation and Operating Manual DOC | V4.0 | 2009.06...

  • Page 90: Advanced Mode: Licenses

    You can select all required text on this page with the mouse and copy it to the clipboard with the [Ctrl]+[C] key combination, for example if you want to send it via e-mail. DOC | V4.0 | 2009.06 Installation and Operating Manual Bosch Security Systems...

  • Page 91: Function Test

    Does the VideoJet X20 transmit all the required data? – Does the VideoJet X20 respond to alarm events as required? – Do the recordings occur as intended? – Is it possible to control peripherals if necessary? Bosch Security Systems Installation and Operating Manual DOC | V4.0 | 2009.06...

  • Page 92

    | Configuration Using a Web Browser VideoJet X20 DOC | V4.0 | 2009.06 Installation and Operating Manual Bosch Security Systems...

  • Page 93: Operation

    Insert the product CD into the computer's CD-ROM drive. If the CD does not start automatically, open the root directory of the CD in Windows Explorer and double-click MPEGAx.exe. Follow the on-screen instructions. Bosch Security Systems Installation and Operating Manual DOC | V4.0 | 2009.06...

  • Page 94

    Enter the IP address of the VideoJet X20 as the URL. The connection is established and after a short time you will see the LIVEPAGE with the video image. DOC | V4.0 | 2009.06 Installation and Operating Manual Bosch Security Systems...

  • Page 95: The Livepage

    If you do not connect, the unit may have reached its maximum number of connections. Depending on the unit and network configuration, each VideoJet X20 can have up to 25 Web browser connections or up to 50 connections via VIDOS or Bosch Video Management System. Protected VideoJet X20...

  • Page 96

    You can switch connected units using the relays in the VideoJet X20 (for example lights or door openers). To activate this, click the icon for the corresponding relay next to the video image. The icon will be red when the relay is activated. DOC | V4.0 | 2009.06 Installation and Operating Manual Bosch Security Systems...

  • Page 97

    When the connection maintaining voice contact with the VideoJet X20 is broken, the next user to make a connection to the VideoJet X20 can send audio data to the VideoJet X20. Bosch Security Systems Installation and Operating Manual DOC | V4.0 | 2009.06...

  • Page 98: Saving Snapshots

    Click the icon again to stop recording. NOTICE! You can play back saved video sequences using the Player from Bosch Security Systems, which can be installed from the product CD supplied (see Section 3.1 Scope of Delivery, page 11).

  • Page 99: Running Recording Program

    You can ascertain from the Dual Video view for which camera a recording is running by moving the mouse cursor over the icon. A message is displayed below the mouse cursor. Bosch Security Systems Installation and Operating Manual DOC | V4.0 | 2009.06...

  • Page 100: The Recordings Page

    You will see a time bar below the video image for quick orientation. A green arrow above the bar indicates the position of the image currently being played back within the sequence. DOC | V4.0 | 2009.06 Installation and Operating Manual Bosch Security Systems...

  • Page 101

    To do this, place the mouse cursor in the timeline below the timescale and turn the scroll wheel. Playback is automatically stopped (paused) during scrolling. Trick mode requires Bosch Security Systems Installation and Operating Manual DOC | V4.0 | 2009.06...

  • Page 102: Installing The Player

    Configuration Manager program. Installing the Player You can play back saved video sequences using the Player from Bosch Security Systems, which can be installed from the product CD supplied (see Section 3.1 Scope of Delivery, page 11).

  • Page 103: Hardware Connections Between Video Servers

    This option can also be used to connect a sender and a compatible receiver using a switch connected to the alarm input. You do not need a computer to make the connection in this case. Bosch Security Systems Installation and Operating Manual DOC | V4.0 | 2009.06...

  • Page 104

    Start the terminal program and enter the command 4 in the main menu to switch to the Rcp+ menu. In the Rcp+ menu, enter the command 5 to deactivate the automatic connection. DOC | V4.0 | 2009.06 Installation and Operating Manual Bosch Security Systems...

  • Page 105: Operation Using Software Decoders

    Bosch CCTV products as one component of an extensive video security management system. It allows you to integrate your existing components into a simple-to-control system or into the entire Bosch range, benefiting from a complete security solution based on the latest technology and years of experience.

  • Page 106

    106 en | Operation VideoJet X20 DOC | V4.0 | 2009.06 Installation and Operating Manual Bosch Security Systems...

  • Page 107: Maintenance And Upgrades

    Connect LED flashes red (see Section 3.4 Connections on the Front Panel, page 16). All settings will revert to their defaults. Change the IP address of the VideoJet X20 if necessary. Configure the unit to meet your requirements. Bosch Security Systems Installation and Operating Manual DOC | V4.0 | 2009.06...

  • Page 108: Repairs

    The VideoJet X20 should only be passed on together with this installation and operating manual. Your Bosch product is designed and manufactured with high-quality materials and components which can be recycled and reused. This symbol means that electrical and electronic equipment, at their end-of-life, should be disposed of separately from your household waste.

  • Page 109: Appendix

    If you are unable to resolve a malfunction, please contact your supplier or systems integrator, or go directly to Bosch Security Systems Customer Service. You can view a range of information about your unit version on the System Overview page (see Section 5.45 Advanced Mode: System Overview, page 90).

  • Page 110: General Malfunctions

    Audio configuration and LIVEPAGE Functions pages. The audio voice connection is Wait until the connection is free already in use by another and then call the sender again. receiver. DOC | V4.0 | 2009.06 Installation and Operating Manual Bosch Security Systems...

  • Page 111

    CD. ActiveX components. Web browser contains Active proxy server in network. Create a rule in the local empty fields. computer's proxy settings to exclude local IP addresses. Bosch Security Systems Installation and Operating Manual DOC | V4.0 | 2009.06...

  • Page 112: Malfunctions With Iscsi Connections

    LUN mapping is not Some iSCSI systems do not Delete the initiator extension on possible. support the use of an initiator the Identification configuration extension. page. DOC | V4.0 | 2009.06 Installation and Operating Manual Bosch Security Systems...

  • Page 113: Leds

    VideoJet X20 is faulty, for example following failed firmware upload. HDD LED Does not light up: No hard drive fitted. Lights up orange: Hard drive fitted. Flashes orange: Hard drive activity. Bosch Security Systems Installation and Operating Manual DOC | V4.0 | 2009.06...

  • Page 114: Processor Load

    The serial interface supports the RS-232, RS-422 and RS-485 transmission standards. The mode used depends on the current configuration (see Section 5.37 Advanced Mode: COM1, page 79). Connection is via the terminal block. DOC | V4.0 | 2009.06 Installation and Operating Manual Bosch Security Systems...

  • Page 115: Terminal Block

    For the RM1 and RM2 contact specifications, see Section Remote Indication of the Connection Status, page 22. For the backup power supply specifications, see Section Backup Power Supply, page 23. Bosch Security Systems Installation and Operating Manual DOC | V4.0 | 2009.06...

  • Page 116: Communication With Terminal Program

    When you have entered a value, such as the IP address, check the characters you have entered before pressing Enter to transfer the values to the VideoJet X20. DOC | V4.0 | 2009.06 Installation and Operating Manual Bosch Security Systems...

  • Page 117

    Additional Parameters You can use the terminal program to check other basic parameters and modify them where necessary. Use the on-screen commands in the various submenus to do this. Bosch Security Systems Installation and Operating Manual DOC | V4.0 | 2009.06...

  • Page 118: Copyrights

    Corporation not be used in advertising or publicity pertaining to distribution of the software without specific, written prior permission. This software is based in part on the work of the Independent JPEG Group. DOC | V4.0 | 2009.06 Installation and Operating Manual Bosch Security Systems...

  • Page 119: Specifications

    Dimensions (H × W × D) 61 × 160 × 178 mm / 2.4 × 6.3 × 7.0 in, including BNC connections Weight Approx. 1.5 kg / 3.3 lb, including HDD Bosch Security Systems Installation and Operating Manual DOC | V4.0 | 2009.06...

  • Page 120: Protocols/standards

    IGMP V3, ICMP, RTSP, FTP, ARP, SNTP, SNMP (V1, MIB-II), 802.1x Audio coding protocol G.711, 300 Hz to 3.4 kHz Audio sampling rate 8 kHz Audio data rate 80 kbps DOC | V4.0 | 2009.06 Installation and Operating Manual Bosch Security Systems...

  • Page 121: Glossary

    Unit of measurement for the speed of data transmission Bits per second, the actual data rate BVIP Bosch Video over IP unit CompactFlash; interface standard, for digital storage media amongst other things. Used in computers in the form of CF cards, digital cameras and Personal Digital Assistants (PDA).

  • Page 122

    Management Information Base; a collection of information for remote servicing using the SNMP protocol MPEG-2 Improved video/audio compression standard, compression on highest level allows images in studio quality; now established as broadcast standard DOC | V4.0 | 2009.06 Installation and Operating Manual Bosch Security Systems...

  • Page 123

    Storage Networking Industry Association; association of companies for defining the iSCSI standard SNMP Simple Network Management Protocol; a protocol for network management, for managing and monitoring network components Bosch Security Systems Installation and Operating Manual DOC | V4.0 | 2009.06...

  • Page 124

    User Datagram Protocol Uniform Resource Locator Unshielded Twisted Pair See Wide Area Network Wide Area Network A long distance link used to extend or connect remotely located local area networks DOC | V4.0 | 2009.06 Installation and Operating Manual Bosch Security Systems...

  • Page 125: Index

    Licenses 90 Default 50 Live video images 27 Default profile 50 Livepage 44 Deleting recordings 55 Low Voltage Directive 8 Device ID 37 Low-pass filter 47 Device name 31 Bosch Security Systems Installation and Operating Manual DOC | V4.0 | 2009.06...

  • Page 126

    Time 23 Recording media 54 Time server 33 Recording profiles 56 Time server IP address 33 Recording program 99 Time server protocol 33 Recording scheduler 59 Time signal 33 DOC | V4.0 | 2009.06 Installation and Operating Manual Bosch Security Systems...

  • Page 127

    Unit time 32 URL 28 USB interface 16 User name 32 Value 47 VCR 46 Video content analysis 65 Video input 46 Video sensor 65 VRM 53 Watermarking 42 Bosch Security Systems Installation and Operating Manual DOC | V4.0 | 2009.06...

  • Page 128

    128 en | Index VideoJet X20 DOC | V4.0 | 2009.06 Installation and Operating Manual Bosch Security Systems...

  • Page 130

    Bosch Sicherheitssysteme GmbH Robert-Koch-Straße 100 85521 Ottobrunn Germany Telefon 089 6290-0 089 6290-1020 www.boschsecurity.com © Bosch Sicherheitssysteme GmbH, 2009...

Comments to this Manuals

Symbols: 0
Latest comments: