Bosch VIDEOJET X20 Installation & Operating Manual page 21

VideoJet X20
4.3.4 SFP Slot
You can establish an additional network connection by inserting a mini-GBIC module into the
SFP slot for example via fiber optic cables (OF).
CAUTION!
!
Only laser class 1 transceivers are approved for use in the VideoJet X20.
Use only approved modules.
4.3.5 Direct iSCSI Connection
You can connect the VideoJet X20 directly to an iSCSI system via one of the network
interfaces. For ETH 1 or ETH 2 connections, use a UTP category 5 network cable with RJ45
plugs.
NOTICE!
i
You can obtain a list of compatible iSCSI systems from your supplier or directly from Bosch
Security Systems. This list is constantly being updated and extended.
4.3.6 CF Slot
You can insert a type I or II CompactFlash card into the Compact Flash slot to enable
recordings to be saved locally. CF cards are the ideal solution for shorter storage times and
temporary recordings, for example alarm recordings or local buffering in the event of network
interruptions.
The VideoJet X20 supports high-performance CF cards with a storage capacity of up to 8 GB.
NOTICE!
i
You can obtain a list of compatible CF cards from your supplier or directly from Bosch
Security Systems. This list is constantly being updated and extended.
Playing back recordings is also possible using a different VideoJet X20 or a VideoJet X40.
CAUTION!
!
Setting up partitions clears all existing data from the card.
You should therefore check whether the CF card contains any data that needs to be backed up
before it is inserted.
1.
2.
Bosch Security Systems
Carefully slide the CF card, top side down, into the slot as far as it will go.
To remove the CF card, push the eject button to its right and then take out the card.
Installation and Operating Manual
Installation | en 21
V3.5 | 2007.12