Bosch VIDEOJET X20 Installation & Operating Manual page 42

42 en | Configuration Using a Web Browser
5.12.8 I-frame distance
This parameter allows you to set the intervals in which the I-frames will be coded. 0 means
auto mode, whereby the video server inserts I-frames as necessary. An entry of 1 indicates
that I-frames are continuously generated. An entry of 2 indicates that only every second image
is an I-frame, and 3 only every third image etc.; the frames in between are coded as P-frames.
5.12.9 P-frame quality
This setting allows you to adjust the image quality of the P-frames depending on the
movement within the image. The Auto option automatically adjusts to the optimum
combination of movement and image definition (focus). Selecting Manual allows you to set a
value between 4 and 31 on the slide control. The value 4 represents the best image quality
with, if necessary, a lower frame refresh rate depending on the settings for the maximum data
rate. A value of 31 results in a very high refresh rate and lower image quality.
5.12.10 I-frame quality
This setting allows you to adjust the image quality of the I-frames. The Auto option
automatically adjusts the quality to the settings for the P-frame video quality. Selecting
Manual allows you to set a value between 4 and 31 on the slide control. The value 4
represents the best image quality with, if necessary, a lower frame refresh rate depending on
the settings for the maximum data rate. A value of 31 results in a very high refresh rate and
lower image quality.
V3.5 | 2007.12 Installation and Operating Manual
VideoJet X20
Bosch Security Systems