Cisco WS-C3550-12G Software Configuration Manual page 78

Menus and Toolbar
Table 3-10 Menu Bar (continued)
Menu-Bar Options
2 6
Router Redundancy
1
(guide mode available )
2 6
Fallback Bridging
1
802.1X
1
AVVID Wizards
Port
2
Port Settings
Port Search
1
Port Security
2
EtherChannels
2
SPAN
2
Protected Port
2
Flooding Control
VLAN
2
VLAN
1
(guide mode available )
2
VMPS
2
VLAN Maps
Catalyst 3550 Multilayer Switch Software Configuration Guide
3-18
Task
Add a switch to or remove a switch from an HSRP group.
Create a fallback bridging group, modify a group, delete a group, or view its details.
Configure 802.1X authentication of devices as they are attached to LAN ports in a
point-to-point infrastructure.
1
• Video Wizard —Optimize multiple video servers for transmitting video traffic.
1
• Priority Data Wizard
Display and configure port parameters on a switch.
Search for a port through its description.
Enable port security on a port.
Group ports into logical units for high-speed links between switches.
Enable Switch Port Analyzer (SPAN) port monitoring.
Configure a port to prevent it from receiving bridged traffic from another port on the same
switch.
Block the normal flooding of unicast and multicast packets, and enable the switch to block
packet storms.
Display VLAN membership, assign ports to VLANs, and configure Inter-Switch Link
(ISL) and 802.1Q trunks. Display and configure the VLAN Trunking Protocol (VTP) for
interswitch VLAN membership.
Configure the VLAN Membership Policy Server (VMPS).
Configure VLAN maps.
—Provide a higher priority to specific applications.
Chapter 3 Getting Started with CMS
78-11194-03