Cisco WS-C3550-12G Software Configuration Manual page 271

Chapter 9 Creating and Maintaining VLANs
This example shows a example of a VMPS database configuration file as it appears on a Catalyst 6000
series switch. The file has these characteristics:
• The security mode is open.
• The default is used for the fallback VLAN.
• MAC address-to-VLAN name mappings—The MAC address of each host and the VLAN to which
each host belongs is defined.
• Port groups are defined.
• VLAN groups are defined.
• VLAN port policies are defined for the ports associated with restricted VLANs.
!VMPS File Format, version 1.1
! Always begin the configuration file with
! the word "VMPS"
!
!vmps domain <domain-name>
! The VMPS domain must be defined.
!vmps mode {open | secure}
! The default mode is open.
!vmps fallback <vlan-name>
!vmps no-domain-req { allow | deny }
!
! The default value is allow.
vmps domain DSBU
vmps mode open
vmps fallback default
vmps no-domain-req deny
!
!
!MAC Addresses
!
vmps-mac-addrs
!
! address <addr> vlan-name <vlan_name>
!
address 0012.2233.4455 vlan-name hardware
address 0000.6509.a080 vlan-name hardware
address aabb.ccdd.eeff vlan-name Green
address 1223.5678.9abc vlan-name ExecStaff
address fedc.ba98.7654 vlan-name --NONE--
address fedc.ba23.1245 vlan-name Purple
!
!Port Groups
!
!vmps-port-group <group-name>
! device <device-id> { port <port-name> | all-ports }
!
vmps-port-group WiringCloset1
device 198.92.30.32 port 0/2
device 172.20.26.141 port 0/8
vmps-port-group "Executive Row"
device 198.4.254.222 port 0/2
device 198.4.254.222 port 0/3
device 198.4.254.223 all-ports
!
!
!VLAN groups
!
!vmps-vlan-group <group-name>
! vlan-name <vlan-name>
78-11194-03
Catalyst 3550 Multilayer Switch Software Configuration Guide
Understanding VMPS
9-35