Cisco WS-C3550-12G Software Configuration Manual page 582

Configuring EIGRP
This is an example of output from the show ip eigrp interface privileged EXEC command:
Switch# show ip eigrp interface
IP EIGRP interfaces for process 109
Xmit Queue
Interface
Gi0/1
Gi0/3
Gi0/4
Gi0/5
This is an example of output from the show ip eigrp neighbors privileged EXEC command:
Switch# show ip eigrp neighbors
IP-EIGRP Neighbors for process 77
Address
160.89.81.28
160.89.80.28
160.89.80.31
This is an example of output from the show ip eigrp topology privileged EXEC command:
Switch# show ip eigrp topology
IP-EIGRP Topology Table for process 77
Codes: P - Passive, A - Active, U - Update, Q - Query, R - Reply,
P 160.89.90.0 255.255.255.0, 2 successors, FD is 0
P 160.89.81.0 255.255.255.0, 1 successors, FD is 307200
This is an example of output from the show ip eigrp traffic privileged EXEC command:
Switch# show ip eigrp traffic
IP-EIGRP Traffic Statistics for process 1
Hellos sent/received: 19812/19821
Updates sent/received: 1/1
Queries sent/received: 0/0
Replies sent/received: 0/0
Acks sent/received: 1/0
Input queue high water mark 1, 0 drops
SIA-Queries sent/received: 0/0
SIA-Replies sent/received: 0/0
Catalyst 3550 Multilayer Switch Software Configuration Guide
22-52
Mean Pacing Time
Peers Un/Reliable
0 0/0
1 0/0
1 0/0
1 0/0
Interface
GigabitEthernet 0/1
GigabitEthernet 0/3
GigabitEthernet 0/4
r - Reply status
via 160.89.80.28 (46251776/46226176), GigabitEthernet0/1
via 160.89.81.28 (46251776/46226176), GigabitEthernet0/3
via 160.89.80.31 (46277376/46251776), GigabitEthernet0/1
via Connected, GigabitEthernet0/3
via 160.89.81.28 (307200/281600), GigabitEthernet0/3
via 160.89.80.28 (307200/281600), GigabitEthernet0/1
via 160.89.80.31 (332800/307200), GigabitEthernet0/1
Multicast Pending
SRTT Un/Reliable Flow Timer
0 11/434
337 0/10
10 1/63
330 0/16
Hold Uptime
(secs) (h:m:s)
13 0:00:41
14 0:02:01
12 0:02:02
Chapter 22 Configuring IP Unicast Routing
Routes
0 0
0 0
103 0
0 0
Q Seq Type
Count Num
0 11
0 10
0 4
78-11194-03