Barcode Labels - Brady LabXpert User Manual

Barcode Labels

The printer allows you to print Code 39 and Code 128 barcode labels. Barcode heights are available
in inches or millimeters.
Human Readable – Text in 4 pt., 6 pt., 7 pt., and 10 pt. font sizes can be toggled on or off. The
human readable text will be centered and positioned below the barcode.
Barcodes are selectable on a line-by-line basis. Note that text and barcodes cannot be combined on
the same line.
To designate a line or lines as a barcode, press [FUNCTION]
Pressing this combination again toggles the barcode function off.
Note: There are some data types such as symbols that cannot be entered or printed while in
barcode mode. If you try to enter this type of information while in barcode mode, you will
receive this error message: Invalid Character.
To change barcode symbology, height, human readable, and width attributes:
1. Press [MENU].
2. Press the [NEXT] softkey two (2) times.
3. Press the [BAR] softkey.
The following menu options appear, with the
display showing the current settings:
Choose from the following options:
•
[SYMB] (Symbology)
Select 39 (check digit on/off), or 128.
•
[HGT] (Height)
Available barcode heights range from .1" to 1.2". Pressing the up and down softkey
arrows raises and lowers barcode height in .1" increments.
Note: To change the barcode height unit type (inches vs. millimeters), you must
change the label units. See Setting Units on page 25.
30
A barcode symbol in the
status bar (on the display
screen) indicates that a line
is designated as a barcode.
+ [BARCODE].
User Manual