Unpacking and Setting up Printer
Feeding and Cutting Label Stock
Feeding and Cutting Label Stock
-
2
8
Use this procedure to advance the media to the cut position, and (optionally) cut
the media.
To feed and/or cut label stock:
1. With the printer power on, press and hold Feed
you want exits the printer.
Note: For die-cut media, the media is advanced to the cut position which is the
next die-cut label. For continue media, the media advances until you release
the Feed button.
2. If desired, press Cut
. The printer will cut off the media.
BBP™31 Sign & Label Printer User Guide
until the length of media