Unpacking and Setting up Printer
Feeding and Cutting Label Stock
Feeding and Cutting Label Stock
2-8
Use this procedure to advance the media to the cut position, and (optionally) cut
the media.
To feed and/or cut label stock:
1. With the printer power on, press and hold Feed
you want exits the printer.
Note: For die-cut media, the media is advanced to the cut position for the next
die-cut label. For continuous media, the media advances until you release the
Feed button.
2. If desired, press Cut
. The printer cuts the media.
®
BBP
until the length of media
85 Label Printer User's Manual