Installing Software Upgrades
Upgrade from a PC
Installing Software Upgrades
Upgrade from a PC
-
7
6
Use this procedure to upgrade your printer to a new version.
To upgrade:
1. Before installing, verify the following:
•
Upgrade Utility is available on your PC or via www.bradyid.com/support.
USB cable is connected from your BBP™31 Printer to your PC.
•
Printer is ON.
•
Note: If the printer driver has not been installed on your PC, you will be
prompted to install the printer driver before continuing.
2. On the printer, press Menu
3. In the menu list, select More Tools
4. Select Upgrade from a PC
Note: If there are unsaved changes in the currently active file, the system will
prompt you to save the file before continuing with the upgrade.
5. On the PC, launch the upgrade utitlity.
6. In the Welcome dialog, select Next.
7. In the Select your printer dialog, select your BBP™31 Printer.
Note: If your printer does not have enough free space, you will be prompted to
install a USB Flash Drive with at least 64MB of free space.
8. In the Version Confirmation dialog, select Go to accept the upgrade or Cancel
to exit.
Note: The printer restarts automatically after the upgrade is complete.
9. In the Success dialog, click Finish.
.
.
.
BBP™31 Sign & Label Printer User Guide