Feeding And Cutting Label Stock - Brady BBP 31 User Manual

Unpacking and Setting up Printer

Feeding and Cutting Label Stock

Feeding and Cutting Label Stock
2-8
Use this procedure to advance the media to the cut position, and (optionally) cut
the media.
To feed and/or cut label stock:
1. With the printer power on, press and hold Feed
you want exits the printer.
Note: For die-cut media, the media is advanced to the cut position which is the
next die-cut label. For continue media, the media advances until you release
the Feed button.
2. If desired, press Cut . The printer will cut off the media.
®
BBP 31 Sign & Label Printer User's Manual
until the length of media