Creating Labels; Cutting And Feeding; Storing Files; On The Printer - Brady M611 User Manual

Creating Labels

Create label files using Brady Workstation software or the Brady Express Labels app. When you first create a
label file, you specify the printer. This allows the software to provide features specific to your printer. Also,
software automatically detects the ribbon and labels installed in the printer. See
Labels" on page
For help using the software, refer to the documentation within the software.

Cutting and Feeding

Use the cutting settings in the software to determine if and when the printer should cut labels. The
software also automatically feeds labels.
If you need to cut manually, from the home screen on the printer, tap Cut or Feed.

Storing Files

On the Printer

Storing label files on the printer allows you to access them later to print without the need of a computer
of mobile device.
You can save labels to the M611 Label Printer from Brady Workstation desktop software or Brady
Express Labels mobile app.
To store files on the printer:
1. Connect the printer to the computer with the USB cable, over Wi-Fi or Bluetooth.
2. Turn on the printer and select Internal Memory, see
3. In Brady Workstation software, open the label file and go to the Print screen.
a. Select the M611 Label Printer, if not already selected.
b. Configure the print settings which will be saved with the stored file.
c. Click the arrow on the PRINT button and select Store on Printer, which will change the
d. Click STORE and enter a name for the print file.
M611 Label Printer User Manual
10.
CAUTION! Do not insert fingers near cutter. It could pinch or cut.
button name to STORE.
"Software for Creating
"Storage Location" on page
Getting Started
Creating Labels
the
8.
28