Program The Thermostat (T4500 Models Only) - Peco T4500 Operating Manual

PROGRAM THE THERMOSTAT (T4500 MODELS ONLY)

PROGRAM THE THERMOSTAT (T4500 MODELS ONLY) PROGRAM THE THERMOSTAT (T4500 MODELS ONLY)
Each day has two or four scheduled events (Occupied1, Occupied2, Unocc1, and Unocc2) per
day, depending on Service Menu confi guration. Each one of these events can be programmed
with a start time and Heat and Cool Setpoints. Heat Setpoint controls system heating during
cold weather. Cool Setpoint controls the cooling system during hot weather. The T4500 is
preprogrammed with factory default settings for seven days of the week as follows:
Time Period
Occupied1
Unocc1
Occupied2
Unocc2
i
Note: To change the preprogrammed times and/or setpoint temperatures, follow the
instructions under "Program scheduled events."
i
Note See Service Menu 240 to enable four scheduled events per day.
:
Start Time
8:00 am
10:00 pm
—
—
Heat Setpoint
Temperature
70° F (21° C)
55° F (10° C)
—
—
Cool Setpoint
Temperature
75° F (24.0° C)
85° F (29.5° C)
—
—
16