Custom Program - Peco T190 Owner's Manual

Time Period/ Event
OCC1
UNOCC1
OCC2
UNOCC2
If the factory program meets your needs, simply follow the "Setting the Day & Time" instructions,
and you're done. If you want to change the preprogrammed times and/or temperatures, follow the
instructions under "Custom Program".

Custom Program

Begin by planning your program. Use the "Custom Program Worksheet" to plan your program
time periods and temperatures you want during each period. Fill in the complete table, as it will
serve as a record of your programs, then follow this procedure:
1. Press PROG once. One day icon and all four event icons will start flashing. (Time and
temperature digits become blank.)
2. Press ▲ or ▼ to scroll to the day you want to program. To select your preference, press
PROG once. (One event icon will be lit and the time digits will start flashing.)
Note: If the time digits display "--:--", then the event's program has been turned off. To turn
Start Time
6:00 am
8:00 am
6:00 pm
10:00 pm
heat Setpoint
Temperature
70° F (21.0° C)
62° F (17.0° C)
70° F (21.0° C)
62° F (17.0° C)
Cool Setpoint
Temperature
78° F (26.0° C)
85° F (29.5° C)
78° F (26.0° C)
82° F (28.0° C)
18