Fan Switch Operation; Setting The Day & Time - Peco T190 Owner's Manual

FAN SwITCh oPERATIoN

The FAN switch has two positions. Slide the switch to the desired fan mode.
POSITION SYSTEM MODE
ON
AUTO
SETTINg ThE DAy & TImE
1. Press D/T once. One day icon will start flashing.
2. Press ▲ or ▼ to scroll to the current day. To select, press D/T once. Hour digits will start
flashing.
Note: Factory default is a 12-hour clock. To toggle between 12-hour and 24-hour time
mode, press the TEMP button while the hour digits are flashing. The difference between
12-hour and 24-hour is not apparent on the display if the hour is between 1:00 AM and
11:59 AM, since an "AM" designation does not appear on the display.
3. Press ▲ or ▼ to scroll to the current hour. To select, press D/T once. Minute digits will start
flashing.
DESCRIPTION
Fan On The fan is on continuously, even if no demand for heating
or cooling exists.
Fan Auto The fan cycles with active demand for heating and
cooling.
1