Panel And Interface Led; Interface Cable - 3Com 3C13886 - Router OC-3 ATM SML Flexible Interface Card Installation Manual

3Com Router Module Guide
Number of connectors
Interface standard
Interface rate
Cable and the Max. transmission
segment
Supported service

3.12.3 Panel and Interface LED

The following figure illustrates the ROUTER 2-PORT ADSL OVER POTS MIM panel.
Figure 3-55 ROUTER 2-PORT ADSL OVER POTS MIM panel
The following table describes the LEDs on the card panels.
Table 3-31 LEDs on the ROUTER 2-PORT ADSL OVER POTS MIM panel
LED
LINK
ACT

3.12.4 Interface Cable

The interface cables that the ROUTER 2-PORT ADSL OVER POTS MIM uses are
regular telephone cables.
1 ()
2 (ROUTER 2-PORT ADSL OVER POTS MIM)
ITU-T 992.1 G.DMT
ITU-T 992.2 G.Lite
ANSI T1.413 Issue 2
In ADSL full rate mode (ITU-T 992.1 G.DMT/ANSI T1.413):
8160 kbps (downlink rate)
896 kbps (uplink rate).
In full rate mode, 1.8 km (1.1 mi.) over the telephone cable
( depending on the line quality).
ADSL over the regular telephone line
OFF means the loop is inactive; ON means the loop has been activated and has
entered the data mode; blinking means the loop is being activated.
OFF means no data is being transmitted or received on the interface and blinking
means data is being transmitted and/or received.
Chapter 3 Multifunctional Interface Modules
Description
3-51