Interface Attributes; Interface Leds - 3Com 3C13886 - Router OC-3 ATM SML Flexible Interface Card Installation Manual

3Com Router Module Guide

2.6.3 Interface Attributes

The interface attributes of ROUTER 1-PORT ANALOG MODEM SIC are given in the
following table:
Table 2-14 Interface attributes of ROUTER 1-PORT ANALOG MODEM SIC
Connector type
Number of connectors
Cable type
Maximum speed
Supported standard
Supported service

2.6.4 Interface LEDs

Figure 2-24 ROUTER 1-PORT ANALOG MODEM SIC panel
Table 2-15 Description of the LEDs on ROUTER 1-PORT ANALOG MODEM SIC panel
LED
LINK
ACT
Attribute
RJ11
1 (ROUTER 1-PORT ANALOG MODEM SIC)
2 ()
Telephone cable with ferrite core
56kbps
ITU-T V.90, V.34 (33.6 kbps), V.FC, V.32 bis, V.32, V.22 bis,
V.22A/B, V.23, V.21, Bell 212A a, Bell 103.
Modem dial-up
OFF means the link is idle. ON means the connection has been established.
Blinking means the connection is being set up.
OFF means the link is idle. Blinking means data is being transmitted or
received.
Chapter 2 Smart Interface Cards
Description
Description
2-24