Table of Contents
Advertisement
3Com Router Module Guide
Figure 3-36 RS530 DTE cable
RS530 DCE cable
Figure 3-37 RS530 DCE cable
Note:
These cables are optional. You must order them together with the MIM card. Otherwise, they are not
provided.
3.7.5 Connecting the Interface Cable
Caution:
Do not plug or unplug interface cables into or from the MIM card to prevent the device or ports from
being impaired.
Before connecting an MIM card, identify the type of the equipment to be connected (that is, the
synchronous/asynchronous mode, DTE/DCE mode, and so on), signaling criterion required by the
access equipment, baud rate, and line clock.
Step 1: Identify type of the interface to be connected and then choose the correct
synchronous/asynchronous serial interface cable.
Chapter 3 Multifunctional Interface Modules
3-31
Advertisement
Table of Contents
Troubleshooting
Need help?
Do you have a question about the 3C13886 - Router OC-3 ATM SML Flexible Interface Card and is the answer not in the manual?
Questions and answers