Router 2-Port 10/100 Mim; Introduction; Interface Attributes; Interface Leds - 3Com 3C13886 - Router OC-3 ATM SML Flexible Interface Card Installation Manual

3Com Router Module Guide
of the current NDEC module. If it is necessary to upgrade the processing capability of
the NDEC module, please contact your agent.

3.5 ROUTER 2-PORT 10/100 MIM

3.5.1 Introduction

The 2-port 10Base-T/100Base-TX FE interface card (ROUTER 2-PORT 10/100 MIM)
provides one/two 10/100 Mbps RJ-45 Ethernet interface(s) for router-and-LAN
communication.
The cards support:
100 meters (328.1 ft.) of transmission segment over the category-5 twisted-pair
cable.
Operation at 100 Mbps and 10 Mbps, autosensing.
Full duplex and half-duplex, with the former in common use.

3.5.2 Interface Attributes

The following table describes the interface attributes of the FIC-FE cards.
Table 3-10 ROUTER 2-PORT 10/100 MIM interface attributes
Attribute
Connector
Number of connectors
Cable
Operating mode
Supported frame format

3.5.3 Interface LEDs

The following figure illustrates an ROUTER 2-PORT 10/100 MIM panel.
Chapter 3 Multifunctional Interface Modules
RJ-45
1
Straight-through Ethernet cable
Full duplex/half-duplex
10/100 Mbps auto-sensing
Ethernet_II
Ethernet_SNAP
3-18
Description
ROUTER 2-PORT 10/100 MIM
2