Panel And Interface Leds; Interface Cable - 3Com 3C13886 - Router OC-3 ATM SML Flexible Interface Card Installation Manual

3Com Router Module Guide
Number of connectors
Interface standard
Interface rate
Cable type
Operating mode
Supported service

4.6.3 Panel and Interface LEDs

The following figure illustrates an ROUTER 1-PORT CE3 FIC panel.
Figure 4-30 ROUTER 1-PORT CE3 FIC panel
The following table describes the LEDs on the card panel.
Table 4-16 LEDs on the ROUTER 1-PORT CE3 FIC panel
LED
LINK
ACT

4.6.4 Interface Cable

The external interface provided by the ROUTER 1-PORT CE3 FIC uses two SMB
sockets respectively for data transmitting (Tx) and data receiving (Rx). The interface
transmits in 75-ohm unbalanced mode and uses a pair of 75-ohm unbalanced coaxial
cables to connect another device.
Attribute
2
G.703, G.704, G.751
34.368 Mbps
E3 cable (75-ohm coaxial cable)
E3
CE3
E3 leased line
OFF means no link is present; ON means a link is present.
OFF means no data is being transmitted or received on the interface; blinking means
data is being transmitted and/or received.
Description
Description
4-30
Chapter 4