Care And Maintenance; Self-Cleaning The Oven - Bertazzoni X365PIRX Installation, Use & Care Manual

36” freestanding dual fuel ranges
Hide thumbs Also See for X365PIRX:
Table of Contents

Advertisement

CARE AND MAINTENANCE

SELF‐CLEANING THE OVEN
Electric Oven
The self‐cleaning mode of your new range
features a pyrolytic self‐cleaning cycle. When set
to the CLEAN mode, the oven reaches a high
temperature of approximately 840°F/450°C that
burns off all food residues from the inside of the
oven.
When the oven is set for CLEAN, the cooktop
burners may be used.
It is common to see smoke and/or flames during
the clean cycle, depending on the content and
amount of greasy residues in the oven. If the
flame persists, turn off the oven and allow it to
cool before opening the door and wipe off the
excessive residues.
At the end of the CLEAN cycle, some grey ash or
burned residue may remain inside the oven. This
is a mineral deposit that does not burn or melt.
The amount of ash depends on how heavily
soiled the oven was before it was cleaned. It is
easily removed, when the oven is cold, using a
damp paper towel, sponge, or cloth.
Wipe off any smoke residue that remains on the
front frame with a cleaning product suitable for
oven cavity cleaning. If stains remain, use a mild
liquid cleaner. The amount of smoke stain is
directly related to the amount of food residues in
the oven cavity before the start of the self‐clean‐
ing cycle.
Before Self Cleaning the Oven
Wipe out large spillages, grease and any loose
soil that can be easily removed. Remove any soil
that is outside the door seal area. This appliance
is designed to clean the oven interior and the
portion of the door that faces the oven cavity.
The outer edges of the door and the oven cavity
are not in the cleaning zone. Wipe this area clean
before starting the self‐cleaning cycle.
Remove all utensils and racks.
Make sure the light bulbs and glass covers are in
place.
Turn on the ventilator hood above the range and
leave it on until the self‐clean cycle is completed
(red indicator light turning off).
NOTE: FOR THE FIRST SELF‐CLEANING CYCLE,
REMOVE SMALL ANIMALS AND BIRDS FROM THE
KITCHEN AND SURROUNDING AREAS. OPEN A
NEARBY
WINDOW
VENTILATION.
Door Lock
When the CLEAN cycle starts, the automatic door
lock cycle begins. Check the door to confirm that
it is locked. You can stop the self‐cleaning cycle
FOR
ADDITIONAL
by turning the function selector to the OFF posi‐
tion. The CLEANING light will turn off only after
the oven has cooled below 500°260°C and the
automatic door lock has completed its cycle to
the open position.
NOTE: MAKE SURE THAT THE OVEN DOOR IS
LOCKED AT THE BEGINNING OF THE SELF‐
CLEANING CYCLE.
To Set/Start Self‐Clean cycle
1. Check that the oven cavity is completely empty
and the oven door correctly closed.
2. Select CLEAN fu on oven function selector.
3. Set temperature selector to CLEAN.
After these 3 steps the cooling fans will activate,
the oven door will lock automatically after 60
seconds and both the pre‐heating and clean light
indicators will turn on.
As soon as clean light turns on check to ensure
that the oven door is correctly locked.
At the End of the Self‐Clean cycle
The self‐cleaning cycle lasts approximately 2‐2 ¼
hours; 30‐40 minutes for pre‐heating the oven
(pre‐heating and clean light both on), 60 minutes
for actual cleaning (heating and clean light both
on), 30‐35 minutes for cool‐down (only clean
light on).
When the CLEAN light is turned off the oven door
is unlocked. This will happen when the oven
temperature drops below 460‐500°F/240‐260°C
about.
At the end of the cycle turn both the oven mode
selectors and the temperature to the OFF
position.
Cleaning Hints
1 . The porcelain enamel finish is acid resistant,
but not acid proof. Acidic food, such as citrus
juices, tomatoes, rhubarb, vinegar, alcohol or
milk, should be wiped off and not allowed to
bake onto the porcelain during the next use.
2 . Remove the oven racks.
3 . The heating elements in the oven do not
require
cleaning;
themselves clean when the oven is in use.
Elements are permanently connected. It is
not necessary to clean the broiler shield
above the broil element.
The interior of the oven will still be at baking
temperatures when the automatic lock cycles to
its open position and the oven door can be
opened.
34
the
elements
CAUTION
burn

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents