V4Hd Setup Menu - MOTU V4HD User Manual

V4HD SETUP MENU

Press the MENU button repeatedly to access the
V4HD Setup menu. This menu gives you access to
several important global settings in the V4HD, as
described briefly below.
AV Mode
This is the setting described in "Enable Video" on
page 50.
LCD Contrast
LCD Contrast lets you adjust the contrast of the
front panel LCD display (Figure 12-1).
Input Timecode
This is the setting described in "Timecode Source"
on page 49.
Output Timecode
This is the setting described in "Timecode
Destination" on page 50.
SDI Out TC Format
This is the setting described in "SDI Output
Timecode Format" on page 49.
102
Main Volume Ctl (Control)
The Main Volume Control setting can only be
changed from the V4HD front panel LCD. This lets
you choose which audio output pairs on the V4HD
are controlled using the front panel main volume
knob (as explained in "The PHONES knob" on
page 98). For example, you could enable analog
outs 1-2, which might be connected to a pair of
powered speakers. Or you could enable analog outs
1-2, 3-4 and 5-6. This would allow you to have
main out volume control for a 5.1 surround mix,
using the PHONES knob on the front panel of the
V4HD.
The V4HD has 16 output pairs (32 channels total).
Turn the VALUE knob to scroll through all 16
output pairs (four in each 8-channel bank). Push
the VALUE knob to include it (y = yes = include) or
exclude it (n = no = exclude).
Factory Defaults
The Factory Defaults setting can only be accessed
from the V4HD front panel LCD. The Factory
Defaults setting restores the V4HD factory settings.
Push VALUE to initiate the operation. When the
LCD asks "Are you sure?", push VALUE to complete
the operation.
F R O N T P A N E L L C D P R O G R A M M I N G