Video Menu - MOTU V4HD User Manual

value chosen will flash. Push the VALUE knob to
confirm your choice; the newly chosen value will
stop flashing.
The PHONES knob
The PHONES knob lets you control the volume of
either the headphone jack or the outputs on the
rear panel that you have designated as the main
outs (see "Main Volume Ctl (Control)" on
page 102). Press the knob to toggle between the
headphones and the main outs. As explained in the
next section, the LCD provides detailed feedback
as you turn the knob. To view the current setting
without changing it, just push the knob (without
turning it).
Parameter "zooming"
For many settings, the LCD temporarily "zooms
in" to display a long-throw meter and alpha-
numeric display to give you precise, real-time
feedback as you adjust the setting. For example, if
you change the headphone volume, the LCD will
display a level meter and gain reduction reading
that updates as you turn the volume knob. After a
brief time-out, the display returns to its previous
state before you turned the volume knob.
Figure 12-4: For many settings, the LCD "zooms in" on the setting as
you adjust it.

VIDEO MENU

Press the MENU button repeatedly to access the
Video menu. The Video menu gives you access to
the many video-related settings in the V4HD, as
described briefly below.
98
Video Source
This is the setting described in "Video Source
menu" on page 44.
Auto Detect
This is the setting described in "Auto Detect Input
Format" on page 48.
HD Format
This is the setting described in "Format
Conversion menu" on page 44.
Up Convert/Down Convert
These are the same settings as described in "SD to
HD up conversion formats" on page 45 and "HD to
SD down conversion formats" on page 44.
HDMI Source
This is the setting described in "HDMI Output
Source" on page 51.
SD Component Out
This is the setting described in "SD Component
Output Color Mode" on page 51.
HD Component Out
This is the setting described in "HD Component
Output Color Mode" on page 51.
HDMI Mode
This is the setting described in "HDMI/DVI" on
page 46.
NTSC Setup
This is the setting described in "480i Setup" on
page 50.
480i Component
This is the setting described in "480i Component
Analog Format" on page 49.
Legalizer NTSC (or PAL)
This is the setting described in "480i Broadcast
Legalizer" on page 51 and "576i Broadcast
Legalizer" on page 51.
F R O N T P A N E L L C D P R O G R A M M I N G