MOTU V4HD User Manual page 90

Stripe
Click this button to start or stop time code. To set
the start time, click directly on the SMPTE time
code display in the Generator section and type in
the desired start time. Or drag vertically on the
numbers.
Figure 10-2: Setting the time code start time.
Regenerate
This option, when enabled, causes the generator to
generate time code whenever the V4HD is
receiving SMPTE time code.
Generate from sequencer
This option, when enabled, causes the generator to
generate time code whenever you are running an
audio editor such as AudioDesk or Digital
Performer. Time code begins at the time specified
by the AudioDesk or Digital Performer main
transport.
90
Click here to edit
the start time, or
drag vertically
on the numbers.
M O T U S M P T E S E T U P