Using Your Monitor For The First Time; Inserting The Batteries - Microlife BP3MQ1-LF Instruction Booklet

b) Upper arm cuffs:
Type S101 for arm circumference 24–33.7 cm or 9.5" - 13.25"
Type S102 for arm circumference 30.5 - 40.64 cm 12" - 16"
Your monitor comes with a medium and a large sized cuff.
Please Note:
Arm circumference should be measured with a measuring tape in the middle of the relaxed
upper arm. Do not force cuff connection into the opening. Make sure the cuff connection is
not pushed into the AC adapter port. If the cuff is too small, call 1-800-568-4147 for further
information. You may prefer to use one of our wrist type monitors.

4. Using your monitor for the first time

4.1 Inserting the batteries

After you have unpacked your device, insert the batteries. The battery compartment is
located on the back of your device. (See illustration)
a) Remove cover as illustrated.
b) Insert the 4 AA 1.5V batteries following the indicated polarity.
c) If the battery warning appears on the display, the batteries are discharged and must be
replaced.
Attention!
• After the low battery indication warning appears, the device will not function until the
batteries have been replaced. Please use "AA" Long Life or Alkaline 1.5V batteries.
Rechargeable batteries are not recommended.
• If the blood pressure monitor is left unused for long periods of time, remove the batteries
from the device.
Battery
Compartment
Cover
7