Using The Monitor For The First Time; Inserting The Batteries; Setting The Date And Time; Selecting The Correct Cuff - Microlife Aponorm Basis Control Instructions For Use Manual

1. Using the monitor for the first time

Inserting the batteries

After having unpacked the monitor, insert the batte-
ries. The battery compartment
of the monitor. Insert the batteries (4 x size AA
1.5 V), observing the indicated polarity +/-.

Setting the date and time

1. After the new batteries are fitted, the year
flashes in the display. Press the M button
several times to set the year. To confirm the
year you want to set, press the time button
2. Now you can set the present month in the
same way, using the M button
your setting by pressing the time button
3. F ollow the instructions above to set the day,
hour and minutes.
4. Once you have set the minutes and confirmed
the setting, the date/time setting is complete.
When the monitor is not in operation, it dis-
plays the time
required for the memory display.

I f you want to change the date and time
subsequently, press and hold the time button
down for approx. 3 seconds until the year starts
to flash. Now you can enter the new values as
described above.
6
is on the bottom
7
and confirm
3
. The date, however, is only
20

Selecting the correct cuff

Microlife offers different cuff sizes. Select the cuff
size to match the circumference of your upper arm
(measured by close fitting in the centre of the upper
arm).
I f the cuff coming with the monitor does not fit,
8
please contact your local pharmacist who can order
an alternative size for you.
Cuff size
3
.
4 S
M
M - L
.
4
 I n addition to the above-mentioned soft cuffs,
a preformed comfort cuff is available in M - L,
one size fits all.
 U se only aponorm
red by Microlife.
 A ll aponorm
 C onnect the cuff to the monitor by inserting
the cuff connector
far as it will go.
for circumference of
upper arm
17 - 22 cm
22 - 32 cm
22 - 42 cm
cuffs or cuffs manufactu-
®
cuffs are latex-free.
®
into the cuff socket
9
as
5