Switch To Copy/Fax/Scan Mode - Canon imageCLASS MF4880dw Basic Operation Manual

Switch to Copy/Fax/Scan Mode

Switch to Copy, Fax, or Scan mode fi rst to use each mode.
•
If you use the Fax mode for the fi rst time:
Fax setup guide will appear on the display. Refer to the on-screen instructions and Starter Guide to confi gure
the settings.
•
To set a frequently used mode to the standby mode:
Press [
screen  [OK].
•
To specify how long the machine waits before returning to standby mode:
Press [
16
If you do not operate the machine for a while, the machine
returns to the Copy mode (standby mode) automatically.
Copy Mode
Copy: Press Start
01
100% LTR
1
+ -
Density: 0
Original Type: Text
2-Sided: Off
Fax Mode
Specify destination.
01/01/2012 12:52AM
RX Mode: Auto
Resolution: 200 x 1
Scan Mode
Select the scan type.
Computer
Remote Scanner
] (Menu)  <Preferences>  <Display Settings>  <Select Default Screen>  Select the
] (Menu)  <Timer Settings>  <Auto Reset Time>  Specify the time  [OK].
Press the desired mode key.
Displays the copy ratio, paper source,
paper size, and number of copies.
To change the settings:
...
▲
▼
1. Press [ ] or [ ] to highlight an item, and
then press [OK].
▲
▼ ◄
2. Press [ ], [ ], [
values, and then press [OK].
Displays the recipient's number.
To change the settings:
...
▲
▼
1. Press [ ] or [ ] to highlight an item, and
then press [OK].
▲
▼ ◄
2. Press [ ], [ ], [
values, and then press [OK].
To select the scan method:
▲
▼
] or [ ] to highlight an item, and
Press [
then press [OK].
►
] or [ ] to specify the
►
] or [ ] to specify the