Settings for Sending Faxes
<Select Line Type>
<Register Unit Name
<Set Pause Time>
<TX Terminal ID>
<Check Dial Tone Before
Bold: Default settings
Off-Hook Alarm Volume:
1 to 3
1 to 2 to 15 (seconds)
Redial Times: 1 to 2 to 10
Redial Interval: 2 to 99
Redial When Error Occurs:
Print Position: Inside Image
Area, Outside Image Area
Mark Number as: FAX, TEL
Register a fax number for the machine.
The number that you register will appear at the top of the fax.
If you cannot send a fax, change the line type.
If you are not sure about your telephone line
type, contact your local telephone company.
Specify whether or not to sound an alarm when the handset
of the external telephone is left unhooked at the end of a fax
You can specify frequently used settings as the default.
Register your machine name (the name of company or the
user). The name that you register will appear at the top of the
The Error Correction Mode (ECM) automatically detects and
corrects errors during fax communication. Using the ECM
function can diminish send errors even over poor connections.
Specify the length of pauses added to fax destination
Set auto redialing to automatically reattempt to connect to
a destination if the line is busy or an error occurs. You can
also specify the how many times to redial a number and the
interval between attempts.
Specify whether or not to include the sender ID at the top of
recipient's faxes. Information such as your fax number and
name is included, enabling the recipient to recognize the
03/03/2013 02:07 PM
When sending a fax, you can specify whether or not to verify
the dial tone before dialing.