Changing Fax RX Settings
] or [
] to highlight <Fax Settings>, and then press [OK].
] or [
] to highlight <RX Function Settings> or <RX Print Settings>, and then press [OK].
] or [
] to highlight the desired item, and then press [OK].
See "Settings for Receiving Faxes" below.
Specify the setting values, and then press <Apply> or [OK].
] to close the screen.
Settings for Receiving Faxes
<Switch to Auto RX>
<Print on Both Sides>*
* MF8580Cdw only
Bold: Default settings
Ring Times: 1 to 2 to 99
Remote RX ID: 00 to 25 to 99
Ring Time till Auto RX: 1 to 15
to 99 (seconds)
The Error Correction Mode (ECM) automatically detects
and corrects errors during fax communication. Using the
ECM function can diminish receive errors even over poor
Specify whether or not the external telephone will ring during
an incoming call if <RX Mode> is set to <Auto> or
<Fax/Tel Auto Switch>.
After the external telephone rings for specified times, the
machine automatically starts receiving the fax, if the call is a fax.
If the call is a voice call, the machine rings only when
<RX Mode> is set to <Fax/Tel Auto Switch>.
Specify whether or not to remotely instruct the machine to
switch to fax mode when an external telephone is connected.
To send the instruction to the machine, you must dial the
remote RX ID from the external telephone. You can also specify
a remote RX ID.
Specify how long an incoming call should ring before the
machine automatically switches to fax mode. This option is
available when the receive mode is set to <Manual>.
Specify whether or not to print received faxes on both sides of