Switch To Copy Or Scan Mode - Canon imageCLASS D530 Basic Operation Manual

Navigating the Menu
Example: Adjust the density
Menu
Preferences
Press [ ]
Timer Settings
(Menu).
Copy Settings
Adjustment/Maintena
▲
Press [ ] or [
an item, and then press [OK].
If you close the menu before you press [OK], the changes made to the
settings are not saved.

Switch to Copy or Scan Mode

Switch to Copy or Scan mode fi rst to use each mode.
Copy Mode
Copy: Press Start
100%
Scan Mode
Select the scan type.
To specify how long the machine waits before returning to standby mode:
] (Menu)  <Timer Settings>  <Auto Reset Time>  Specify the time  [OK].
Press [
Press [ ] (Back) or [
return to the previous screen.
...
▼
] to highlight Press [
an item, and then press [OK].
If you do not operate the machine for a while, the machine
returns to the Copy mode (standby mode) automatically.
01
LTR
1
+ -
Density: 0
Original Type: Text
...
2-Sided: Off
Computer
Remote Scanner
◄
] to
Copy Settings
Change Defaults
Correct Density
▲ ▼
] or [ ] to highlight
Press the key to switch between the
Copy and Scan modes.
Displays the copy ratio, paper source,
paper size, and number of copies.
To change the settings:
▲
▼
1. Press [ ] or [ ] to highlight an item, and
then press [OK].
▲
▼ ◄ ►
2. Press [ ], [ ], [ ] or [
values, and then press [OK].
To select the scan method:
▲
▼
Press [ ] or [ ] to highlight an item, and
then press [OK].
Correct Density
-
◄ ►
Press [ ] or [ ] to adjust the
level, and then press [OK].
▲
(If necessary, press [ ] or [
Press [ ] (Menu) to save
the setting.
] to specify the
+
▼
].)
13