In the manual, the OSD (on screen display) may be
different from your TV's, because it is just an example to
help you with the TV operation.
There are several options you might need to set up in
order for your TV to work properly. Read the instructions
Initial Setup: Set according to the screen display.
Switching On/Off the TV set
First, connect power cord correctly.
Select the viewing source by using
the remote control.
When finished using the TV, press
the remote control. The TV reverts to standby mode.
If you intend to be away on vacation, disconnect the
power plug from the wall power outlet.
If the TV in power on , the screen show information
according the type of input signal, the information
will disappear. If there is no signal, "No Signal" will
display on the screen.
Choose the Menu Language
When you start using your set for the first time, you
must select the language which will be used for
displaying menus and indications.
TV Input and then press MENU button.
button to select Function menu.
/ ENTER button and then use
to select Language.
button to select language.
( English, Spanish or French)
Haier LED HDTV
INPUT button on
POWER button on
Choose the Input source
Change the picture source so you can watch your
TV, VCR, DVD, Cable , or any other devices that are
connected to your TV.
INPUT button to enter the Select Source menu
and then use
button to select the desired
items (TV, Video , Component 1, Component 2, PC,
HDMI 1, HDMI 2, HDMI 3, HDMI 4).
ENTER button to confirm .
This TV set has two methods to set channels, which
are respectively Channel Scan, Channel Skip.
In this section, how to use the remote control to set
channel is explained. You can also use buttons on the
TV to set channel.
The Channel menu will be only operated in normal
MENU button and then use
select Channel menu.
/ ENTER button to select Tuner.
button to select Cable or Antenna
button to select Channel Scan.