Download  Print this page

Choose Your Connection; Connecting A Vcr; External Av Source Setup; Component Setup - Haier HL40XSL2b Owner's Manual

User manual
Hide thumbs

Advertisement

Installation

Choose Your Connection

There are several ways to connect your television,
depending on the components you want to connect
and the quality of the signal you want to achieve. The
following are examples of some different ways to
connect your TV with different input sources.

Connecting a VCR

To avoid picture noise (interference), leave an adequate
distance between the VCR and TV.
Back of VCR
L
R
L
R
VIDEO
AUDIO
AUDIO OUT
AV IN
Back of TV
Connection Option 1
Set VCR output switch to channel 3 or 4 and then turn
the TV to the same channel number.
Connection Option 2
A
Connect the audio and video cables from the VCR's
output jacks to the TV input jacks, as shown in the
figure. When connecting the TV to VCR, match the
jack colors (Video = yellow, Audio Left = white, and
Audio Right = red). If you connect a S-VIDEO output
from VCR to the S-VIDEO input, the picture quality is
improved; compared to connecting a regular VCR to
the Video input.
B
Insert a video tape into the VCR and press
the VCR. (Refer to the VCR owner's manual.)
C
Select the input source with using the
on the remote control, and then press
to select the source, press ENTER button to confirm.
External A V Source Setup
EN-9
Haier LED HDTV
Video= yellow
Audio left= white
Audio right= red
PLAY on
INPUT button
/
button
How to connect
Connect the audio and video cables from the
external equipment's output jacks to the TV input
jacks, as shown in the figure.
When connecting the TV to external equipment,
match the jack colors (Video = yellow, Audio Left =
white, and Audio Right = red).
L
R
L
R
VIDEO
AUDIO
AUDIO OUT
AV IN
Back of TV
How to use
A
Select the input source with using the
on the remote control.
B
Press
/
button to select the desired source.
C
Press
ENTER button to confirm.
D
Operate the corresponding external equipment.

Component Setup

How to connect
Connect the DVD video outputs (COMPONENT) to the
Y Pb Pr jacks on the TV and connect the DVD audio
outputs to the YPbPr Audio IN jacks on the TV, as shown
in the figure.
Camcorder or video
game set
Video= yellow
Audio left= white
Audio right= red
INPUT button

Advertisement

Table of Contents
loading

  Related Manuals for Haier HL40XSL2b