Table of Contents
Advertisement
Operation
Operation
In the manual, the OSD (on screen display) may be
different from your TV's, because it is just an example to
help you with the TV operation.
There are several options you might need to set up in
order for your TV to work properly. Read the instructions
that follow.
Initial Setup: Set according to the screen display.
Switching On/Off the TV set
A
First, connect power cord correctly.
B
Select the viewing source by using the
button on the remote control.
C
When finished using the TV, press the
button on the remote control. The TV reverts to
standby mode.
D
If you intend to be away on vacation, disconnect the
power plug from the wall power outlet.
Note
If the TV is on, the screen will show information
R
related to the type of input signal, and then the
information will disappear. If there is no signal,
"No Signal" will be displayed on the screen.
Choose the Menu Language
When you start using your set for the first time, you must
select the language which will be used for displaying
menus and indications.
A
TV Input and then press the MENU button.
Choose
B
buttons to select the SETTINGS
Press the
3
/
4
menu.
6
C
/ENTER button and then use the
Press the
buttons to select Menu setting.
D
Press the
ENTER button and then use the
buttons to select language.
E
/ENTER button and then use the
Press the
4
buttons to select language.
( English, Français or Español)
EN-13
Haier LED HDTV
Choose the Input source
Change the picture source so you can watch your TV, VCR,
DVD, Cable Box, or any other devices that are connected
to your TV.
A
INPUT
POWER
B
Picture Menu Options
The TV menu gives you access to the menus you can
select.
Note
R
How to select picture mode
The picture mode provides the pre-defined images
settings: Vivid, Standard, Energy Savings, Theater, Sports
and Custom.
A
6
5
/
B
6
5
/
C
6
5
/
You can also press the PICTURE button on the remote
control to select the option Vivid, Standard, Energy
Press the
INPUT button to enter the Select Source
5
menu and then use the
desired source (TV, Composite, Component1, VGA,
HDMI1, HDMI2, HDMI3, HDMI4).
Input Source
TV
Composite
Component
VGA
HDMI1
HDMI2
HDMI3
HDMI4
Press the
ENTER button to confirm .
Depending on the input signal, one or more menu
items may not be selectable.
Press the
MENU button and then use the
buttons to select the Picture menu.
6
/ENTER button and then use the
Press the
buttons to select Mode.
/ENTER button to select the option
Press the
4
Vivid, Standard, Energy Savings, Theater, Sports and
Custom.
6
/
buttons to select the
3
/
4
6
5
/
Advertisement
Table of Contents
