Hdmi Input; Operation; Switching On/Off The Tv Set; Choose The Menu Language - Haier HL24XSL2 Owner's Manual

Connection Option 2
A
Connect the audio and video cables from the Cable
Box's output jacks to the TV input jacks, as shown in the
figure.When connecting the TV to a Cable Box, match
the jack colors (Video = yellow, Audio Left = white, and
Audio Right = red).
B
Select the input source by using the
on the remote control or on the TV.
C
Select your desired channel with the remote control
for cable box.

HDMI input

DIGITAL OUT
HDMI IN
(COAXIAL)
PC/DVI AUDIO IN
HDMI
How To Connect
Connect the cables from the external equipment's
output jacks to the TV input jacks, as shown in the figure.
How To Use
A
Select the input source by using
the remote control or on the TV.
B
Operate the corresponding external equipment.
Refer to external equipment operating guide.

Operation

In the manual, the OSD (on screen display) may be
different from your TV's, because it is just an example to
help you with the TV operation.
There are several options you might need to set up in
order for your TV to work properly. Read the instructions
that follow.

Switching On/Off the TV set

INPUT button
PC IN
INPUT button on
A
First, connect power cord correctly.
B
Select the viewing source by using
the remote control.
C
When finished using the TV, press
the remote control. The TV reverts to standby mode.
D
If you intend to be away on vacation, disconnect the
power plug from the wall power outlet.
Note
If the TV in power on , the screen show information
R
according the type of input signal, the information
will disappear. If there is no signal, "No Signal" will
display on the screen.

Choose the Menu Language

When you start using your set for the first time, you must
select the language which will be used for displaying
menus and indications.
A
TV Input and then press MENU button.
Choose
B
CH+/- button to select Function menu.
Press
C
Press VOL+ /ENTER button and then use CH+/-
button to select Language.
D
VOL+/- button to select language.
Press
( English, Spanish or French)
Language
Video
OSD Timeout
OSD Transparency
Audio
Screen Mode
Channel
DPMS
Blue Screen
Function
DCR
Time Setup
Lock
Closed Caption
Default
Function

Choose the Input source

Change the picture source so you can watch your
TV, VCR, DVD, Cable , or any other devices that are
connected to your TV.
A
INPUT button to enter the Select Source menu
Press
and then use CH+/- button to select the desired
items (TV, composite, Component, PC, HDMI).
B
Press ENTER button to confirm .
Operation
INPUT button on
POWER button on
English
Short
Middle
Normal
On
On
On
CH+/-
Select
EXIT Back
VOL+/-
Haier LED HDTV EN-10