SCSI Requirements
While the Adaptec SCSI RAID 2120S/2200S are designed to work
with Ultra320 SCSI hard disk drives, they will operate, at a reduced
level of performance, with all Ultra 2 or higher SCSI devices. Use of
SCSI devices older than Ultra 2 is not suggested. Older devices will
adversely affect other devices attached to the same channel and
could cause a working Ultra 320 channel to become nonfunctional,
due to distance contraints inherent in using some of these older
devices.
More details about configuring and using SCSI devices are
available in Configuring SCSI Devices
Kit Contents
Your Adaptec controller kit includes:
Adaptec SCSI RAID 2120S/2200S controller with 1 internal LVD
■
SCSI cable having a multimode terminator.
Low-profile bracket.
■
Warranty card.
■
Adaptec SCSI RAID 2120S/2200S CD; a bootable CD that
■
includes RAID management software, drivers, and
documentation.
on page
2-1.
Introduction
1-3