Printing Customization Information - Lucent Technologies SPIRIT 2448 Administration Manual

Printing Customization Information - 5

If your system has optional equipment for Call Report information, you can print the results of
your system and telephone customization, your System SpeedCall directory, and the call
reporting customization information.
NOTE: You can also send this same information about your system to a personal computer.
To begin, follow steps 1-4 on page 13. At STEP 5, dial 5.
PRINT SYSTEM CUSTOMIZATION
Press FEATURE. Dial 1.
The printer will print the customization information for system features.
PRINT TELEPHONE CUSTOMIZATION
Press FEATURE. Dial 2.
The printer will print the telephone customization information. The print-out will show
information for a system capacity of 48 telephones, whether you have that many in your system
or not.
PRINT SYSTEM SpeedCall DIRECTORY
Press FEATURE. Dial 3.
The printer will print a System SpeedCall directory.
PRINT CALL REPORT INFORMATION
Press FEATURE. Dial 4.
The printer will print the Call Report customization information.
CANCEL PRINTER
Press FEATURE. Dial #.
Use this procedure to cancel the current activity and resume sending call records.
After you request a printing activity, you may exit customization and the printing will
continue. You should not, however, continue with other customization procedures while
customization information is still being printed.
NOTE: During the printing of customization information, the printing of call records by the Call
Report feature is interrupted. The system will store the information for 24 calls, but information
on more calls than that will be lost. Since the printing of the telephone customization information
can take as long as five minutes, you may want to schedule printing activities during times
when your system is not very busy.
Some sample print-outs of Call Records and customization information are shown on the
next pages.
After completing a printing operation, you may do any of the following:
press the FEATURE button to go to another print feature
press the ENTER ADMIN button to go back to STEP 5 on page 13
hang up the receiver or press SPEAKER to exit customization
Administration Manual 27