How To Customize; Confirmation And Error Tones - Lucent Technologies SPIRIT 2448 Administration Manual

How to Customize

Getting Started
When you have finished your plans you are ready to customize the system. You must do all
customizing from telephone set 10, which must be a 24-button set. You cannot use an attendant
adjunct for customization. For telephone customization, including the COPY functions, the
telephone(s) being customized must not be in use. If you want to reset the system, all
telephones in the system (except set 10) must not be in use, so you will want to choose a time
when people are not using their telephones.
If you want, you can plan for future needs while you customize. If your system is not at
capacity (for instance, you have 18 lines and 30 telephones in your SPIRIT system now,
but plan to expand to 24 lines and 40 telephones in the future) you may customize the unequipped
lines and extensions now. For proper operation of AUTOMATIC LINE SELECTION, you
should customize LINE TYPE as Unavailable for the unequipped lines.

Confirmation and Error Tones

Throughout this manual you are told that you will receive a confirmation tone after correct
dialing and an error tone when you have made a mistake. It is important to become familiar
with the confirmation and error tones before you start customizing the system. The following
exercise provides examples of these tones.
Press INTERCOM.
12 Administration Manual
Lift handset (or press SPEAKER).
To hear a confirmation tone,
Dial # 2
To hear an error tone,
Dial 0. Press MEMORY. Dial 28.