AT&T MERLIN PIus Attendant Installer's Manual page 50

Printing Call
Processing Reports
LOST AUTHORIZED
CALLER CODE
To print the current settings of call processing options,
perform the following steps:
1 Select an outside line and dial a telephone number that
is answered by the MERLIN Attendant.
NOTE: If you are programming from a remote
location using a single-line standard Touch-
Tone phone, enter only one pound (#) sign for
every two pound signs (##) that appear in a
programming command.
Wait for an answer.
2
Dial * followed immediately by the authorized caller
3
code and ##.
Dial *29 followed by the appropriate selection:
4
01
02
03
5 Dial ##.
6 Once the report is completed, exit authorized caller
mode by dialing *##.
7 To disconnect, dial ##.
If the default authorized caller code (789) is changed and
the new code is lost or forgotten, the default code can be
restored. However, this procedure also restores all the
MERLIN Plus system default settings so that any changed
programmed setting must be reentered and all
announcements must be rerecorded.
To restore the default authorized caller code:
1 On the back of the MERLIN Attendant, set switches 1
and 2 to off (up).
=
Day Answer Delay
= Night Answer Delay
= Dialing Delay
Troubleshooting 3 - 9