AT&T MERLIN PIus Attendant Installer's Manual page 49

Resetting the
Counters
3-8 Troubleshooting
4 Dial *2909 and the following appropriate choice:
= print route programming
1
2 = print traffic analysis report
= print business schedule
3
4 = print announcement time allocations
5 Once the report is complete, exit authorized caller
mode by dialing *##.
6 To disconnect, dial ##.
To reset the call handling traffic statistics to 0, perform the
following steps:
1 Select an outside line and dial a telephone number that
is answered by the MERLIN Attendant.
NOTE: If you are programming from a remote
location using a single-line standard Touch-
Tone phone, enter only one pound (#) sign for
every two pound signs (##) that appear in a
programming command.
2 Wait for an answer.
3 Dial * followed immediately by the authorized caller
code and ##.
4 Dial *29101.
5 Exit authorized caller mode by dialing *##.
6 To disconnect, dial ##.