Lucent Technologies CentreVu Release 3 Version 8 Disk-Mirrored Systems User Manual page 97

Troubleshooting
Error messages
CentreVu CMS Release 3 Version 8 Disk-Mirrored Systems
Message:
metadb: hostname : cxtyd0sz has a
metadevice database replica
Explanation: The slice named in the message already has a replica.
Response: If you really need to add another replica, choose a
different slice.
Message:
metadetach: systemname : d21: resync in
progress
Explanation: You cannot detach a metadevice while a resync is in
progress.
Response: Try again later. To find out how far along the resync has
progressed, enter a metastat command.
Message:
must have at least 2 databases
Response: Add a state database replica and retry the command.
Message:
No disks found! Internal error.
Response: Add the state database replicas and retry the command.
If the message persists, telephone the National Customer
Care Center (1-800-242-2121) or contact your Lucent
distributor or customer representative.
Message:
No more space on device
Explanation: Occurs during a restore cpio command:
cpio -icmudf -C10240 -I input-device -M
"Enter tape.. " .."/cms*..
The "/cms" entry has probably been mistyped.
Response: Remove the /cms directory and all files and try again.
Message:
command : not found
Explanation: Command does not exist or is not in the execution path.
Response: Use the entire path—as pathname/command—or add it
to the execution path with the following command:
# export PATH=$PATH: pathname
The path of the metastat, metadb, metattach, and
metadetach commands is /usr/opt/SUNWmd/sbin; the
path of the olds command is /olds
Error Messages (Continued)
91