Step 3: Label And Store The Tapes - Lucent Technologies CentreVu Release 3 Version 8 Disk-Mirrored Systems User Manual

Maintaining Mirrored Systems
Doing a CMSADM backup on a mirrored system
Step 3: Label and
store the tapes
CentreVu CMS Release 3 Version 8 Disk-Mirrored Systems
3. Display the CentreVu CMS Administration menu by entering a
cmsadm command. For example:
# cmsadm
Lucent Technologies CentreVu(R) Call Management
System Administration Menu
Select a command from the list below.
1) acd_create
. . . .
4. Enter the number of the backup option. The system prompts for
the tape drive.
5. Enter the appropriate option number. The system begins calculating
the approximate number of tapes required and informs you of its
calculation. For example:
The backup will need approximately 2 tapes.
You will be prompted for additional tapes.
Be sure to number the cartridge tapes
consecutively in the order they will be
inserted.
Please insert the first cartridge tape into
/dev/rmt/ <xxx>
Press ENTER when ready:
6. Insert the tape, wait for it to rewind and reposition, and press Enter.
The backup begins.
During the backup, you may receive a prompt about CMS being on
or prompts to insert more tapes. Respond to each prompt as
appropriate, and then press Enter.
When the backup completes, it will be verified. If you used more
than one tape, you will have to reinsert each tape.
Any time you need to insert a tape, allow it to rewind and reposition
before you press Enter.
After the tape verification, the system prompts you to label the tapes and
then returns you to the system prompt:
3
Please label the backup tape(s) with the date and
the current CMS version ( <version> ).
#
Label the tapes as instructed. Bundle them with the vfstab printout and
put them away in a safe place.
Define a new ACD
42