Step 11: Complete The Os Installation; Step 12: Alter The Tape Configuration File (Enterprise 3500 Only) - Lucent Technologies CentreVu Release 3 Version 8 Disk-Mirrored Systems User Manual

Maintaining Mirrored Systems
Restoring a mirrored system from a CMSADM backup
Step 11: Complete
the OS installation
Step 12: Alter the
tape configuration
file ( Enterprise
3500 only)
CentreVu CMS Release 3 Version 8 Disk-Mirrored Systems
This procedure completes the operating system installation.
Task
3
1 No action required. When the
installation completes, the
machine reboots and prompts
for a root password.
2 Enter the same password you
had before you began the
installation.
3 Enter the password again.
4 Log in as the root user.
If you are running on a Sun Enterprise 3500 platform, you must alter the
/kernel/drv/st.conf file so the operating system recognizes the 3500's
8mm tape drive. To accomplish that, do the following steps:
1. Start an editor such as vi or the CDE Text Editor, and load the
3
/kernel/drv/st.conf file.
2. Find the #tape-config-list= line. It should be in the vicinity of
line number 40.
3. Insert, immediately before that line, the following:
# Begin CMS tape configuration list.
tape-config-list=
"EXABYTE EXB-8900","Mammoth EXB-8900 8mm Helical
Scan","EXB-8900",
"TANDBERG TDC 4200", "Tandberg 2.5 Gig QIC", "TAND-25G-
FIXED",
"TANDBERG SLR5", "Tandberg 8 Gig QIC", "TAND-8G-FIXED";
EXB-8900 = 1,0x29,0,0xce39,4,0x7f,0x7f,0x7f,0x7f,0;
TAND-25G-FIXED = 1,0x37,512,0x867a,1,0x00,0;
TAND-8G-FIXED = 1,0x37,512,0x963a,4,0xA0,0xD0,0xD0,0xD0,3;
# End CMS Tape configuration list.
4. Save the file and exit the editor.
Action Result
On this screen you can create a
root password.
. . .
Root password:
Press Return to continue.
Please reenter your root
password?
Press Return to continue.
. . .
syslog services starting.
Print services started.
volume management starting.
The system is ready.
<hostname> console login:
#
58