Lucent Technologies CentreVu Release 3 Version 8 Disk-Mirrored Systems User Manual page 23

Installing Mirrored Systems
How to upgrade an Enterprise platform to disk mirroring
Partitioning (Note: Never change the default size of the overlap slice!)
Disk
Part
Type
Boot
Nonboot
CentreVu CMS Release 3 Version 8 Disk-Mirrored Systems
4. Enter: partition> print
The partition table displays and the partition> prompt returns.
Compare the display to the Partitioning table below to see whether
you need to re-partition the disk. You probably will need to re-
partition.
5. Enter the number of the partition to be reconfigured.
The system begins a series of prompts for partitioning information.
Answer according to the CMS version and disk type you are
partitioning (see the Partitioning table below).
Repeat this task for each partition on the disk.
Tag
0 boot disk 1: / or root
boot disk 2: unassigned
1 unassigned
overlap or backup
2
3 unassigned
4 swap
5-7 unassigned
0 unassigned
1 unassigned
2 overlap or backup
3-7 unassigned
6. Enter: partition> print
The partition table displays and the partition> prompt returns.
Compare the display to the Partitioning table to make certain you
have repartitioned the disk properly. If not, repeat step 5.
7. Enter: partition> label
The system responds Ready to label disk, continue?
CMS R3V8
4.2-GB Disk
Size Starting
Flag
(cyl.) Cylinder
wm 1023 0
wm 7 1023
wm 3880 0
wm 1879 1030
wm 971 2109
wm 0 0
wm 2 0
wm 3878 2
wm 3880 0
wm 0 0
CMS R3V8
9.1-GB Disk SCSI
(E3000) and FC-AL
(E 3500)
Size Starting
(cyl.) Cylinder
616 0
7 616
4924 0
3716 623
585 4339
0 0
2 0
4922 2
4924 0
0 0
17