Step 8: Select The Hard Disks; Step 9: Set Up The Disk Partitions - Lucent Technologies CentreVu Release 3 Version 8 Disk-Mirrored Systems User Manual

Maintaining Mirrored Systems
Restoring a mirrored system from a CMSADM backup
Step 8: Select the
hard disks
Step 9: Set up the
disk partitions
CentreVu CMS Release 3 Version 8 Disk-Mirrored Systems
This procedure selects hard disks for partitioning.
Task
3
1 No Action Required.
2
Check the list of disk drives in the Available column: it should list
every disk in your system. If it doesn't, you probably have a
connectivity problem. In that case stop the installation, power
down, secure all drive connections, and restart the installation.
3 a. Click the disk name to
highlight an available disk.
b. Click Add to select the disk.
c. Repeat a and b until all
available disks are in the
Selected column.
d. Click Continue.
4 Click Continue.
5 Click Manual Layout.
6 Click Customize.
This procedure sets up the disk partitions.
3
Task
1 No action required.
2 Click the cylinders icon for the
disk you want to partition.
Action
Action
Result
The Select Disks screen is
displayed.
The Preserve Data? screen
is displayed.
The Automatically Layout
File Systems? screen is
displayed.
The File System and Disk
Layout screen is displayed.
The Customize Disks
screen is displayed.
Result
The Customize Disks
screen is displaying. This
screen lists partitioning for two
disks, one in the left panel and
another (if another exists) in the
right panel.
The Customize Disks by
Cylinder screen is
displayed.
55