Lucent Technologies CentreVu Release 3 Version 8 Disk-Mirrored Systems User Manual page 89

Troubleshooting
The system fails to recognize all disk drives
CentreVu CMS Release 3 Version 8 Disk-Mirrored Systems
/sbus@3,0/SUNW,fas@3,8800000
Target 0
Unit 0 Disk
SUN4.2G74629737K6748
.
.
.
Target 6
Unit 0 Disk
TOSHIBA XMS5701TASUN12XCD099704/09/97
ok
7. IMPORTANT! If you had to do a reset-all command, reset
autoboot? to true by entering the following command:
ok setenv auto-boot? true
!
WARNING:
Failure to reset autoboot? before the next reboot will cause the
reboot to stop at the boot prompt instead of proceeding through the
normal boot-up.
8. When you have verified that the system is recognizing all its disk
drives, reboot the system with a boot -r command and log in as
the root user. For example:
ok> boot -r
.
.
.
console login: root
Password:
SEAGATE ST34371W
Copyright(c) 1997 Seagate
All rights reserved
Removable Read Only device
83