Noise Reduction (Only For Video Signals) - Barco iCon H250 Owner's Manual

7. Advanced
Image 7-20
How to adjust the Phase
1. Press MENU to activate the Tool bar
2. Press → to select the Image item
3. Press ↓ to Pull down the Image menu
4. Use ↑ or ↓ to select settings
5. Press → to pull down the menu
6. Use ↑ or ↓ to select Phase
7. Press ENTER
On the screen appears now a slider box
Image 7-21
8. Use ←or → , the numeric keys on the remote, or the keypad to change the Phase
7.5.1.8

Noise Reduction (only for video signals)

How to remove noise in the image
1. Press MENU to activate the Tool bar
2. Press → to select the Image item
3. Press ↓ to Pull down the Image menu
4. Use ↑ or ↓ to select settings
5. Press → to pull down the menu
6. Use ↑ or ↓ to select Noise Reduction
7. Press ENTER
66 R5976992 ICON H250/400 13/12/2006