Phase (Rgb Signals Only); Noise Reduction (Only For Video Signals); Gain Control On Video; Automatic Gain On Video - Barco Sim 5H Owner's Manual

7.2.1.7

Phase (RGB signals only)

Phase adjustment
A bad phase adjustment will result in bad transitions and sometimes noise. (for example text will not be clear).
How to adjust the Phase
1. Press MENU to activate the Tool bar
2. Press → to select the Image item
3. Press ↓ to Pull down the Image menu
4. Use ↑ or ↓ to select settings
5. Press → to pull down the menu
6. Use ↑ or ↓ to select Phase
7. Press ENTER
On the screen appears now a slider box
Image 7-9
8. Use ←or → , the numeric keys on the remote, or the keypad to change the Phase
7.2.1.8

Noise Reduction (only for video signals)

How to remove noise in the image
1. Press MENU to activate the Tool bar
2. Press → to select the Image item
3. Press ↓ to Pull down the Image menu
4. Use ↑ or ↓ to select settings
5. Press → to pull down the menu
6. Use ↑ or ↓ to select Noise Reduction
7. Press ENTER
On the screen appears now a slider box
Image 7-10
8. Use ←or → , the numeric keys on the remote, or the keypad to change the Noise Reduction
7.2.2

Gain control on Video

7.2.2.1

Automatic Gain on Video

Automatic Gain on Video is only for Video signals
Enabling/disabling the Automatic Gain on Video
1. Press MENU to activate the Tool bar
R59770247 SIM 5H 04/06/2008
7. Advanced
49