Lens Installation; Removing The Lens - Barco iCon H250 Owner's Manual

4.2

Lens installation

How to install ?
1. Take the lens out of its packing material
2. Fix the lens by placing it in the housing
Image 4-3
Note: In case of a motorized lens the female jack must be in front of the male jack located in the upper-left part of the housing
in the projector
3. Push carefully to lock the lens in the housing
4.3

Removing the lens

How to remove the lens ?
1. Unlock the lens by pulling the handle located on the right side of the projector
Image 4-4
2. Remove the lens out of its housing
C
AUTION
Always remove the lens before transporting the projector.
R5976992 ICON H250/400 13/12/2006
:
Never transport the projector with the lens mounted on it !
Image 4-5
location of the lens handle
4. Installation
13