Snmp Integration - Barco iCon H250 Owner's Manual

11. SNMP services
3. In the "Security" tab, the default Community is called 'public' and is read-only.
You may want to give read-write permission to 'public' (not recommended) or create a 'private' community
with read-write permissions.
4. In the Control Server, enable the SNMP support, and optionally, enable read-write support.
5. The SNMP service should be restarted, to take the changed settings into account.
To uninstall the snmp agent: regsvr32 /u IQProSNMP.dll

11.2 SNMP integration

Commands
Following commands are provided stored in the MIB :
Command
PROJECTORTYPE
SERIALNUMBER
LAMPPRODUCTNUMBER
LAMPSERIALNUMBER
SERVERTYPE
SERVERVERSION
EMBEDDEDSOFTWAREVERSION
PROJECTORLANGUAGE
PROJECTORNAME
LOCATION
ORIENTATION
RESOLUTION
DESKTOPRESOLUTION
PROJECTORSTATE-cooldown
PROJECTORSTATE-textbox
PROJECTORSTATE-projector
PAUSE
FREEZE
PROJECTORRUNTIME
LAMPWARNINGSTATUS
LAMPALERTSTATUS
LAMPMODE
LAMPRUNTIME
LAMPSTATUS
LAMPWARNINGTIME
I2CDIAGNOSTICS
136
Type
READ
READ
READ
READ
READ
READ
READ
READ
READ
READ
READ
READ
READ
READ
READ
READ/WRITE
READ/WRITE
READ/WRITE
READ
READ
READ
READ/WRITE
READ
READ
READ/WRITE
READ
R5976992 ICON H250/400 13/12/2006