7. Advanced
On the screen appears now a slider box
Image 7-15
8. Use ←or → , the numeric keys on the remote, or the keypad to change the Phase
7.4.1.8
Noise Reduction (only for video signals)
How to remove noise in the image
1. Press MENU to activate the Tool bar
2. Press → to select the Image item
3. Press ↓ to Pull down the Image menu
4. Use ↑ or ↓ to select settings
5. Press → to pull down the menu
6. Use ↑ or ↓ to select Noise Reduction
7. Press ENTER
On the screen appears now a slider box
Image 7-16
8. Use ←or → , the numeric keys on the remote, or the keypad to change the Noise Reduction
7.4.2
Gain control on Video
7.4.2.1
Automatic Gain on Video
Automatic Gain on Video is only for Video signals
Enabling/disabling the Automatic Gain on Video
1. Press MENU to activate the Tool bar
2. Press → to select the Image item
3. Press ↓ to Pull down the Image menu
4. Use ↑ or ↓ to select Settings
5. Press → to pull down the menu
6. Use ↑ or ↓ to select Gain Control on Video
7. Press → to pull down the menu
8. Use ↓ or ↑ to select Auto
9. Press → to pull down the menu
10.Use ↓ or ↑ to enable (ON) or disable (OFF) the Automatic Gain on Video
11. Press ENTER
64
R59770286 NW-12 25/09/2008